Which AC Conversion Kit Fits My Golf Cart?
Pick your cart and tell us what the upgrade should give you. You get the route that fits, a controller kit, a full DC to AC conversion or an AC controller kit, the rating for the job your cart does, and the reason for each, ready to order.
Have a question about your cart?
Reach out for one to one help from our team. Tell us about your cart, your setup or the upgrade you are planning, and we will point you to the right part.
How to find the upgrade kit that fits your cart
The AC Conversion Kit Finder at the top of this page matches an upgrade kit to your golf cart and to what you want from it. A few one-tap questions, and it ends on the kits that plug into your cart, each ready to order. It is free and there is no sign-up.
- Pick your cart. Choose the make and model, or type the serial number of a Club Car, E-Z-GO or Yamaha.
- Confirm the setup. If your model came with more than one electrical system, count the batteries and pick the setup that matches what you see under the seat. Each option lists the clues: the controller label, the plug and how the cart behaves.
- Say what you want. More top speed, more hill power or both, then how hard the cart works and what batteries it runs.
- Read the answer. The best route for your cart comes first, with the reasons under How we worked it out. The other routes that fit sit in their own tabs.
- Choose a kit and check out. Press Choose this kit, pick the rating (the one for your job is marked), and press Add to cart. The button then turns into View cart.
Examples: from your cart to your kit
An E-Z-GO TXT 48V that slows down on hills
- Choose E-Z-GO, then TXT or Medalist, then 48V pack.
- Pick TXT 48V: the controller label reads Curtis 1206HB.
- Tap More hill power, Medium and Lead-acid, healthy.
What you see: Best route for your cart: a DC to AC conversion, 600A with a 5kW motor. The Navitas TAC2 kit for the TXT 48V leads the conversion tab, with the Eco Battery kit, the Alltrax AC1 and the 850A TAC3 after it. The keep your motor tab holds the TSX controller kit if you would rather keep your motor.
A Club Car DS with the IQ system
- Choose Club Car, then DS, then 48V pack, then DS with the IQ system.
- Tap Both, Medium and your batteries.
What you see: an AC conversion at 600A with a 4kW motor. Open a kit and the 5kW rating is greyed out with the reason: the 5kW motor is too long for the DS frame.
A Yamaha Drive (G29) that feels flat on the straight
- Choose Yamaha, then Drive (G29).
- Tap More top speed, Light and Lead-acid, healthy.
What you see: a controller kit that keeps your motor, 440A. The Navitas TSX kit for the G29 comes first; the Curtis 500A kit and the AC conversions are there to compare.
An E-Z-GO RXV, built 2012 or later
- Choose E-Z-GO, then RXV, then 48V pack, then RXV 2012 and up: the plug on the controller has 35 pins.
- Answer the three questions.
What you see: an AC controller kit. The RXV is already AC, so there is no motor to change: the Navitas TAC2 kit for the RXV with the Curtis controller and the Alltrax AC1 kit, with the rating for your job marked.
A cart that used to be faster
Tap It used to be faster. A cart that has slowed down usually has a fault, not a limit, so the finder points you to the troubleshooter and the free checks first. Show me the upgrade kits anyway carries on to the kits.
Upgrade kits for the most common carts
The short version for the carts we are asked about most. The finder gives the full answer for your exact cart, setup and job.
| Your cart and controller | Keep the motor | Go AC |
|---|---|---|
| E-Z-GO TXT 48V, Curtis 1206HB | Navitas TSX 3.0 kit, 440A or 600A | Navitas TAC2 (440A 4kW or 600A 5kW), TAC3 850A 7.5kW, Alltrax AC1 650A 5.5kW or Eco Battery kit |
| E-Z-GO RXV | Already AC: Navitas TAC2 controller kit for your label, or Alltrax AC1 | Already AC, no conversion needed |
| Club Car DS with IQ, Curtis 1510 | Navitas TSX 3.0 kit for IQ and Excel | Navitas TAC2 or Eco Battery kit, 4kW options only |
| Club Car Precedent IQ or Excel, Curtis 1510 or 1515 | Navitas TSX 3.0 kit or Curtis 1268 500A kit | Navitas TAC2 (4kW or 5kW), TAC3 7.5kW, Alltrax AC1 650A 5.5kW or Eco Battery kit |
| Yamaha Drive (G29), Moric 26 pin | Navitas TSX 3.0 kit or Curtis 1268 500A kit | Navitas TAC2 4kW or TAC3 850A 7.5kW |
| Yamaha Drive2 AC or ICON, Toyota NEOs M | Already AC: Navitas TAC2 controller kit or Alltrax AC1 | Already AC, no conversion needed |
Not on the list? Club Car Tempo, Onward, Carryall and Regen II, E-Z-GO PDS, DCS, series, ELiTE and utility carts, Yamaha G14 to G22, Star EV, Columbia Par Car, Advanced EV, Denago and Kandi are in the finder too.
AC conversion kits and upgrade kits by cart
What a dealer sells as a golf cart speed kit or speed upgrade kit is usually one of two things: a controller kit that keeps your motor, or a DC to AC conversion kit that swaps the motor and the controller. Here is what fits each popular cart, and why.
Club Car Precedent AC conversion kit
The Precedent runs 48V with a Curtis 1510 or 1510A controller (IQ) or a Curtis 1515 (Excel). Both take the same kits. To keep your motor, the Navitas TSX 3.0 kit or the Curtis 1268 500A kit swaps the controller. To go AC, the frame takes every motor size: the Navitas TAC2 with a 4kW or 5kW motor, the TAC3 850A with 7.5kW, the Alltrax AC1 650A 5.5kW or an Eco Battery kit.
Tip: the Eco Battery kits are split by year, 2004 to 2008 or 2009 and newer, and by the standard or 6 passenger chassis. Open the finder for a Club Car Precedent, or read the Precedent hill and speed upgrade guide.
Club Car DS AC conversion kit
A 48V DS with the IQ system runs a Curtis 1510 like an IQ Precedent, so it takes the same Navitas TSX 3.0 and Curtis 1268 500A controller kits. The AC route is narrower: the 5kW motor is too long for the DS frame, so a DS takes the Navitas TAC2 with the 4kW motor, at 440A or 600A, or the Eco Battery DS kit with a 4kW motor.
Tip: an older DS with a Regen II, a Curtis 1268 or a series motor is its own setup in the finder. Open the finder for a Club Car DS, or read which kit fits your DS.
Club Car Tempo and Onward upgrade kit
A Tempo or Onward with a DC motor runs a Curtis 1510 or 1515 controller on a 48V pack. To keep the motor, the Navitas TSX 3.0 kit for IQ and Excel fits. To go AC, the Alltrax AC1 650A 5.5kW kit and the Eco Battery kit for 2009 and newer Club Cars fit.
Tip: a DC motor has a round brush band and two or three thick cables. A Tempo or Onward with a factory AC motor is already AC, so there is nothing to convert. Open the finder for a Club Car Tempo or Onward, or read our conversion kit guide.
E-Z-GO TXT AC conversion kit
Most TXTs are one of three setups, and the controller label says which. A TXT 48V with a Curtis 1206HB has the widest choice: the Navitas TSX 3.0 kit keeps the motor, and the Navitas TAC2 (440A 4kW or 600A 5kW), the TAC3 850A 7.5kW, the Alltrax AC1 650A 5.5kW and the Eco Battery kit convert it to AC. A PDS (Curtis 1206MX, 36V or 48V) takes its own TSX 3.0 kit or the Curtis 1268 500A kit, a DCS (Curtis 1206SX, 36V) its own TSX 3.0 kit, and both take the Eco Battery AC kit.
Tip: a PDS cart slows itself when you lift off the pedal. Open the finder for an E-Z-GO TXT, or read the TXT 48V upgrade guide.
E-Z-GO RXV AC controller kit
The RXV is AC from the factory, so it takes an AC controller kit that keeps the motor, not a conversion: the Navitas TAC2 at 440A or 600A, or the Alltrax AC1 650A. Carts from 2008 to 2011 (Danaher controller) and from 2012 (Curtis 1206AC) each have their own kit.
Tip: count the pins on the controller plug. 35 pins means 2012 and up. Open the finder for an E-Z-GO RXV, or read the RXV speed and hill upgrade guide.
Yamaha Drive (G29) AC conversion kit
The Drive (G29) runs 48V with a Moric controller on a 26 pin plug. To keep the motor, the Navitas TSX 3.0 kit for the G29 or the Curtis 1268 500A kit swaps the controller. To go AC: the Navitas TAC2 with a 4kW motor at 440A or 600A, or the TAC3 850A with 7.5kW.
Tip: the plug on the controller has 26 pins in two rows. Open the finder for a Yamaha Drive (G29), or read TSX or AC conversion for the G29.
Yamaha Drive2 upgrade kit
The Drive2 was built with a DC motor or an AC motor, and the kits differ. A DC Drive2 has the same Moric controller and 26 pin plug as the G29, so it takes the Navitas TSX 3.0 kit for the G29 or the TAC3 850A 7.5kW AC conversion. A Drive2 AC runs a Toyota NEOs M type controller and is already AC: it takes the Navitas TAC2 AC controller kit at 440A or 600A, or the Alltrax AC1 650A.
Tip: a DC motor has a round brush band and two or three thick cables. Open the finder for a Yamaha Drive2, or read our conversion kit guide.
440A or 600A, 4kW or 5kW: matching the kit to the job
Most kits come in more than one rating. Pick by the job the cart does, not the biggest number. More current means more torque, but it also asks more of the batteries and cables.
| Your cart’s job | Controller | Motor (AC kits) |
|---|---|---|
| Two riders, standard tires, gentle grades | 440A | 4kW |
| Rear seat in use, a lift and bigger tires, or regular hills | 600A | 5kW where the frame allows, 4kW on a DS |
| Steep ground, towing or a heavy cart every day | 850A (TAC3) where it is made for your cart, otherwise 600A | 7.5kW with the TAC3 |
| Eco Battery kits | 350A light, 450A mixed, 600A heavy | 4kW, or 5kW with 450A and 600A where the frame allows |
Already sized a build with the controller amp calculator? The finder uses the same idea and goes one step further: it lists the kits that plug into your cart at that rating.
What is in each kind of kit
| Kind of kit | In the box | Best for |
|---|---|---|
| Controller kit, keep your motor (Navitas TSX 3.0, Curtis 1268) | A controller and the plug-in harness for your cart. Your DC motor stays. | A healthy cart that feels flat with two riders. The smallest job. |
| DC to AC conversion kit (Navitas TAC2 and TAC3, Alltrax AC1, Eco Battery) | An AC motor, an AC controller and the wiring between them. | A cart that climbs, tows or carries four people every day. Holds speed on climbs and adds regenerative braking. |
| AC controller kit (Navitas TAC2, Alltrax AC1) | A tunable controller and the wiring for your cart. The factory AC motor stays. | Carts that are already AC: the E-Z-GO RXV, S4 and L6, the Yamaha Drive2 AC, ICON and Advanced EV. |
A cart that used to be quick and has slowed down usually has a fault, not a limit. Run the free checks first: a tired battery or a hot cable holds back any kit. For the full walkthrough by cart, read our conversion kit guide.
Which upgrade kit fits which golf cart: the full list
Every cart and setup the finder knows, with the kits that keep the motor and the kits that convert it to AC, and the ratings each one comes in for that cart.
Open the full list
Club Car
E-Z-GO
| Your cart | Upgrade, keep your motor | Convert to AC |
|---|---|---|
| TXT or MedalistTXT 48VFactory controller: Curtis 1206HB |
| |
| TXT or MedalistTXT with PDS driveFactory controller: Curtis 1206MX |
| |
| TXT or MedalistTXT with DCS driveFactory controller: Curtis 1206SX |
| |
| TXT or MedalistSeries motor cart with the ITS throttleFactory controller: a series controller with the ITS throttle |
| |
| TXT or MedalistSeries motor cart with a non-ITS throttleFactory controller: a series controller with a non-ITS throttle |
| |
| TXT or MedalistTXT ELiTE with the factory lithium packFactory controller: Curtis 1206HBC | None listed | |
| RXVRXV 2008 to 2011Factory controller: Danaher 83A21102A | Already AC: a new AC controller, the motor stays | Already AC |
| RXVRXV 2012 and up, lead-acidFactory controller: Curtis 1206AC | Already AC: a new AC controller, the motor stays | Already AC |
| RXVRXV ELiTE with the factory lithium packFactory controller: Curtis 1206AC Fleet Lithium | Already AC: a new AC controller, the motor stays | Already AC |
| S4 or L6S4 or L6, 72V lead-acidFactory controller: Curtis 1234SE | Already AC: a new AC controller, the motor stays | Already AC |
| S4 or L6S4 or L6 ELiTE with the factory lithium packFactory controller: the factory ELiTE controller | We do not stock a replacement controller for an S4 or L6 ELiTE with the factory lithium pack. Match the part number on the controller label with an E-Z-GO dealer. | |
| MPT, Workhorse or another utility cart48V utility cart with the ITS throttleFactory controller: Curtis 1268 ITS or 1264 |
| |
| MPT, Workhorse or another utility cartSeries motor cart with the ITS throttleFactory controller: a series controller with the ITS throttle | None listed | |
| MPT, Workhorse or another utility cartSeries motor cart with a non-ITS throttleFactory controller: a series controller with a non-ITS throttle | None listed | |
Yamaha
| Your cart | Upgrade, keep your motor | Convert to AC |
|---|---|---|
| Drive (G29)Drive (G29), 48V electricFactory controller: Moric, 26 pin plug | ||
| Drive2Drive2 with a DC motorFactory controller: Moric, 26 pin plug | ||
| Drive2Drive2 ACFactory controller: Toyota NEOs M type | Already AC: a new AC controller, the motor stays | Already AC |
| G19 or G22G19 or G22, 48V electricFactory controller: the stock controller with the 23 pin plug | None listed | |
| G14 or G16G14 or G16 electricFactory controller: the stock G14 or G16 controller | None listed |
ICON
| Your cart | Upgrade, keep your motor | Convert to AC |
|---|---|---|
| ICON, any modelICON with the Toyota NEOs M type controllerFactory controller: Toyota NEOs M type | Already AC: a new AC controller, the motor stays
| Already AC |
| ICON, any modelICON with another controllerFactory controller: a NEOs L type, red Curtis or LVTONG controller | We do not stock a replacement for the NEOs L type, red Curtis or LVTONG controllers. Match the part number on the label with an ICON dealer. | |
Advanced EV
| Your cart | Upgrade, keep your motor | Convert to AC |
|---|---|---|
| Advanced EV, any modelAdvanced EV with the Toyota NEOs M type controllerFactory controller: Toyota NEOs M type | Already AC: a new AC controller, the motor stays | Already AC |
| Advanced EV, any modelAdvanced EV with another controllerFactory controller: a NEOs L type, red Curtis or LVTONG controller | We do not stock a replacement for the NEOs L type, red Curtis or LVTONG controllers. Match the part number on the label with an Advanced EV dealer. | |
Star EV
| Your cart | Upgrade, keep your motor | Convert to AC |
|---|---|---|
| Star EV, any modelStar EV Classic, 36VFactory controller: the factory Classic controller | None listed | |
| Star EV, any modelStar EV 48V with the Curtis 1268 controllerFactory controller: Curtis 1268 or 1520 | ||
| Star EV, any modelStar EV with a factory AC drivetrainFactory controller: the factory AC controller | We do not stock a replacement controller for a Star EV that came with an AC drivetrain. Match the part number on the label with a Star EV dealer. | |
Columbia Par Car
| Your cart | Upgrade, keep your motor | Convert to AC |
|---|---|---|
| Columbia Par Car, any modelColumbia Par Car 48V with the Sevcon MillipakFactory controller: Sevcon Millipak | ||
| Columbia Par Car, any model24V or 36V Columbia Par CarFactory controller: the factory controller | We do not stock a replacement controller for 24V or 36V Columbia carts. Match the part number on the label with a Columbia dealer. | |
Denago
| Your cart | Upgrade, keep your motor | Convert to AC |
|---|---|---|
| Denago EVDenago EV, 48VFactory controller: the factory Denago controller | Already AC: a new AC controller, the motor stays | Already AC |
Kandi
| Your cart | Upgrade, keep your motor | Convert to AC |
|---|---|---|
| Kandi KruiserKandi Kruiser, 48VFactory controller: the factory Kandi controller | Already AC: a new AC controller, the motor stays | Already AC |
Royal EV
| Your cart | Upgrade, keep your motor | Convert to AC |
|---|---|---|
| Royal EV, any modelRoyal EV with the factory controllerFactory controller: the factory controller | We do not stock a kit for a stock Royal EV. If the cart already runs a Navitas controller, go back and choose Already upgraded. | |
Atlas EV
| Your cart | Upgrade, keep your motor | Convert to AC |
|---|---|---|
| Atlas EV, any modelAtlas EV with the factory controllerFactory controller: the factory controller | We do not stock a kit for a stock Atlas EV. If the cart already runs a Navitas controller, go back and choose Already upgraded. | |