Brand newGenuine Curtis
Curtis 1205M 500A Series Controller for E-Z-GO TXT and Medalist ITS, 36V and 48V
4.7Lab rated
Black Friday price, ends Nov 30.
You save $30 (3%)
- Fits E-Z-GO TXT and Medalist series with ITS, 1994 and up.
- 500A for added torque, 36V or 48V.
- Pre-set for the ITS throttle.
- Long body, four bus bars (Curtis 1205M).
- Programmable with a Curtis handheld programmer.
Secure payments
Pay over time with Klarna on eligible orders. Express payment options available at checkout.
- Free shipping over $199, lower 48
- 30 day returns
- Email support
Overview
This Curtis 1205M 500A controller fits E-Z-GO TXT and Medalist series carts with the ITS throttle from 1994 on. It is a 36 to 48V long body controller with four bus bars, pre-set for the E-Z-GO ITS throttle, and it adds torque over stock.
Need to change a setting? Pre-set at the factory; a Curtis 1313 handheld programmer can change the throttle type (8 other inputs), acceleration, HPD, voltage, plugging and more.
What is the white 4 pin plug for? Programming only. It does not connect to the cart.
- Voltage
- 36V or 48V
- Controller
- 500A
In the box
- One Curtis 1205M 500A series controller, pre-set for the E-Z-GO ITS throttle, new
The solenoid, cables and F and R switch on your cart are not included.
Manuals and documents
Compatibility
Fits
2 cart setups| Cart | Years | Pack voltage | Throttle | Notes |
|---|---|---|---|---|
| E-Z-GO TXT, series | 1994 and up | 36V or 48V | ITS | Curtis 1205M |
| E-Z-GO Medalist, series | 1994 and up | 36V or 48V | ITS | Curtis 1205M |
Does not fit
| Your cart | Get this instead |
|---|---|
| E-Z-GO DCS or PDS carts | Email us and we will match it |
| E-Z-GO RXV and other AC carts | Email us and we will match it |
| Carts with a 0-5K or 5K-0 throttle (unless reprogrammed) | Email us and we will match it |
| Gas carts | Email us and we will match it |
Want to be 100% sure?2 quick checks at the cart
Check that your E-Z-GO is a TXT or Medalist series cart with the ITS throttle. A series motor has terminals A1, A2, S1 and S2.
Unsure? Send us a photo of the controller label and we will check it for you.
Specifications
- Brand
- Curtis
- SKU / MPN
- 995
- Curtis model
- 1205M, long body, four bus bars
- Rated current
- 500A
- Voltage
- 36V to 48V
- Throttle
- Pre-set for E-Z-GO ITS
- Motor type
- Series
- Performance
- Added torque
- Programming
- Curtis 1313 handheld programmer; white 4 pin plug is for programming only
- Curtis model on the label
- 1205M-5606
- Label voltage
- 36-48V
- Condition
- New
Requirements and install notes
Switch the cart to Tow and disconnect the battery pack before you touch any terminal.
Label each heavy cable before you take it off the old controller, so every one goes on the matching post of the new one.
Test the motor and the main solenoid before fitting. A shorted motor or a failed solenoid is the usual reason a replacement controller fails early.
A 500A controller pulls more current than stock, so it needs a heavy duty solenoid, heavy cables and a heavy duty forward and reverse switch.
If you are not comfortable working on a traction system, have the controller fitted by a qualified golf cart technician.
FAQ
Which carts does it fit?
E-Z-GO TXT and Medalist series carts with the ITS throttle from 1994 on, 36V or 48V.
Can I change the settings?
Yes, with a Curtis 1313 handheld programmer: throttle type, acceleration, HPD, voltage, plugging and more.
What else do I need?
A heavy duty solenoid, heavy cables and a heavy duty forward and reverse switch.
Does it work with the stock ITS throttle?
Yes. It comes pre-set for the E-Z-GO ITS throttle.
Does it fit a PDS or DCS cart?
No. It is a series controller.
Warranty
This part is new and covered by our returns and refunds policy. Returns and refunds · Shipping policy
