Navitas

Navitas TAC2 72V AC Controller Kit for E-Z-GO S4 and L6 Replaces Curtis 1234SE, 440A or 600A

Price range: $999.00 through $1,119.00
  • Fits 72V E-Z-GO S4 and L6 with the Curtis 1234SE controller (non ELiTE)
  • Replaces the stock controller: adjustable speed, acceleration and regen with Bluetooth app control
  • TAC2 controller with interface module; ratings: 440A or 600A
  • The 440A kit does not include the On-The-Fly programmer
Buy it as controller only available
Complete kitfrom $999.00
Complete kitTAC2 with the interface module for your cart, for a cart still on its factory controller.from $999.00
Controller onlyReplacement TAC2 for a cart already running one. Match the part number on the old unit.$1,120.00
Apple PayGoogle PayLink

Express checkout options available at checkout

Brand Navitas SKU GCL-NAV-TAC2-AC-KIT-EZGO-S4-L6-72V

Overview

E-Z-GO S4 and L6 personal transport vehicles run a 72V AC system with a Curtis 1234SE controller. This Navitas TAC2 kit is the 72V replacement for that controller. The AC motor stays, and the TAC2 with its pre-installed E-Z-GO L6 CAN module takes the controller position.

No mounting plate is included because this application does not need one. What you gain is control: adjustable speed, acceleration and regenerative braking, plus Bluetooth diagnostics in the Navitas app.

This is a 72V kit. It is not interchangeable with the 48V TXT or RXV kits. Choose 440A or 600A.

Voltage
72V
Controller
440A or 600A
AC motor
Uses existing
CAN bus
Built in
Bluetooth app
Built in

Compatibility

Fits

  • E-Z-GO S4
    Stock controller
    Curtis 1234SE
    Voltage
    72V
    Years
    Identify by controller

    Lead-acid, non ELiTE

  • E-Z-GO L6
    Stock controller
    Curtis 1234SE
    Voltage
    72V
    Years
    Identify by controller

    Lead-acid, non ELiTE

Does not fit

  • Carts whose controller label reads something other than Curtis 1234SE
  • E-Z-GO ELiTE L6 or S4 with factory Samsung lithium batteries (no compatible kit currently exists)
  • Any 48V E-Z-GO (TXT, RXV)

Not listed here? Contact us to verify fitment before you order. support@golfcartlab.com

How to confirm it fits

  1. Confirm the cart is a 72V S4 or L6 and read the controller label for the Curtis 1234SE part number.

  2. If the cart has the factory ELiTE Samsung lithium battery, this kit does not apply and there is currently no Navitas kit for it.

  3. Send us a photo of the controller label if you are unsure.

Buying guide: A Beginner’s Guide to Choosing a Golf Cart Conversion Kit

What's in the box

440A

  • Navitas TAC2 440A AC controller with Bluetooth
  • TAC2 E-Z-GO L6 module with CAN (installed)

600A

  • Navitas TAC2 600A AC controller with Bluetooth
  • TAC2 E-Z-GO L6 module with CAN (installed)
  • On-The-Fly programmer

Specifications

Compare options

Specification440A600A
Manufacturer part number10-000879-1610-000881-21
Rated controller current440A600A
On-The-Fly programmerNot includedIncluded
Brand
Navitas
Controller
Navitas TAC2 AC controller
System voltage
72V
Replaces stock controller
Curtis 1234SE
AC motor
Uses the cart's existing AC motor (not included)
CAN enabled
Yes
Bluetooth app programming
Yes, Navitas app
Regenerative braking
Yes
Controller sealing
IP65 (Navitas TAC2)
Condition
New
Warranty
24 months from ship date

Shipping weight and box dimensions are confirmed before dispatch.

Requirements and install notes

  1. This is a controller swap on a cart that already runs an AC motor. The motor stays; the stock controller comes out and the TAC2 goes in its place.

  2. Disconnect the battery pack and discharge the controller before you touch any terminal. Follow the Navitas TAC2 installation manual step by step.

  3. Check the main battery cables and terminals before installation. Corroded or undersized cables limit what any controller can deliver.

  4. Settings are adjusted in the Navitas app over Bluetooth. Dealer level app access is available to qualified dealers only.

  5. If you are not comfortable working on a 48V or 72V traction system, have the kit installed by a qualified golf cart technician.

  6. No mounting plate is supplied or needed for this application.

  7. The 440A kit does not include the On-The-Fly programmer.

FAQ

Which E-Z-GO carts does this kit fit?

The 72V E-Z-GO S4 and L6 with lead-acid batteries and the Curtis 1234SE controller. It does not fit an S4 or L6 ELiTE with the factory Samsung lithium battery, or any 48V E-Z-GO such as the TXT or RXV.

Does the kit include a motor?

No. The S4 and L6 are already AC and keep their motor. The kit has the TAC2 controller with Bluetooth and the E-Z-GO L6 CAN module already installed. No mounting plate is needed on this application.

Is there a kit for the lithium ELiTE S4 or L6?

Not at the moment. No compatible kit currently exists for the ELiTE S4 or L6 with the factory Samsung lithium battery.

How do I set it up?

Speed, acceleration, regenerative braking and live diagnostics are set in the Navitas app on a phone or tablet, over Bluetooth. The 600A kit adds the On-The-Fly programmer for changes from the seat; on the 440A kit it can be added.

Warranty

Navitas TAC2 AC systems carry a 24 month warranty from the ship date, handled by us. Proof of purchase is required. Labour, damage from incorrect installation, wrong voltage, overload and non-OEM part substitution are not covered. See our returns and refunds policy for the full process.

Manufacturer part reference

Manufacturer part number
10-000881-21
GCL SKU
GCL-NAV-TAC2-AC-KIT-EZGO-S4-L6-72V

Reviews

There are no reviews yet.

Be the first to review “Navitas TAC2 72V AC Controller Kit for E-Z-GO S4 and L6 (Replaces Curtis 1234SE), 440A or 600A”

Your email address will not be published. Required fields are marked *