Navitas

Navitas TAC2 DC to AC Conversion Kit for E-Z-GO TXT 48V Replaces Curtis 1206HB

Price range: $2,049.00 through $2,209.00
  • Fits E-Z-GO TXT 48V with the Curtis 1206HB controller (non ELiTE)
  • Converts the cart to AC: stronger torque, regenerative braking and Bluetooth app control
  • Complete kit with Navitas AC motor, TAC2 controller and On-The-Fly programmer; ratings: 440A 4kW or 600A 5kW
  • Does not fit: E-Z-GO TXT ELiTE with factory Samsung lithium batteries, or any other ELiTE model
Buy it as controller only available
Complete conversion kitfrom $2,049.00
Complete conversion kitAC motor, TAC2 controller and install parts, for a cart still on DC drive.from $2,049.00
Controller onlyReplacement TAC2 for a cart already converted with this kit. Match the part number on the old unit. Pick the rating.
440A, for the 4kW kit (10-000888-36)$1,099.00600A, for the 5kW kit (10-000890-27)$1,120.00

Welcome offer eligible. Add to cart to activate $80 off.

Apple PayGoogle PayLink

Express checkout options available at checkout

Brand Navitas SKU GCL-NAV-TAC2-DC-AC-KIT-EZGO-TXT48

Overview

The 48V E-Z-GO TXT with a Curtis 1206HB controller is one of the most common carts on the road, and one of the most rewarding to convert. This Navitas kit replaces the DC motor and the stock controller with a Navitas AC motor and a CAN enabled TAC2 controller.

Owners notice the change on the first hill: stronger torque, a higher top speed within the limits you set, and regenerative braking that holds speed on the way down. The AC system is also more efficient, which means more run time from the same batteries.

The kit ships with the motor, controller, TXT interface module, On-The-Fly programmer, mounting plate and hardware, a run/tow switch mounting plate, and the motor phase and sensor cables. Choose 440A with a 4kW motor or 600A with a 5kW motor.

Voltage
48V
Controller
440A or 600A
AC motor
4kW or 5kW
CAN bus
Built in
Bluetooth app
Built in

Compatibility

Fits

  • E-Z-GO TXT 48V
    Stock controller
    Curtis 1206HB
    Voltage
    48V
    Years
    Identify by controller

    Lead-acid, non ELiTE

Does not fit

  • Carts whose controller label reads something other than Curtis 1206HB
  • E-Z-GO TXT ELiTE with factory Samsung lithium batteries, or any other ELiTE model
  • TXT carts without the Curtis 1206HB controller (for example 36V TXT models)
  • E-Z-GO RXV (already AC)

Not listed here? Contact us to verify fitment before you order. support@golfcartlab.com

How to confirm it fits

  1. Read the controller label under the seat. It must be a Curtis 1206HB.

  2. Confirm the cart runs 48V lead-acid batteries and is not an ELiTE lithium model.

  3. Use the E-Z-GO serial lookup to confirm model and year, and send us a controller photo if unsure.

Buying guide: A Beginner’s Guide to Choosing a Golf Cart Conversion Kit

What's in the box

440A 4kW

  • Navitas 4kW AC motor
  • Navitas TAC2 440A CAN controller with Bluetooth
  • TAC2 module
  • On-The-Fly programmer
  • TAC2 hardware and mounting kit
  • Run/tow switch mounting plate
  • AC motor phase cable
  • Motor sensor cable

600A 5kW

  • Navitas 5kW AC motor
  • Navitas TAC2 600A CAN controller with Bluetooth
  • TAC2 module
  • On-The-Fly programmer
  • TAC2 mounting plate kit
  • Run/tow switch mounting plate
  • AC motor phase cable
  • Motor sensor cable

Specifications

Compare options

Specification440A 4kW600A 5kW
Manufacturer part number10-000889-3610-000891-27
Rated controller current440A600A
AC motorNavitas 4kW AC induction motor (included)Navitas 5kW AC induction motor (included)
Motor spline19 toothNot stated
Brand
Navitas
Controller
Navitas TAC2 AC controller
System voltage
48V
Replaces stock controller
Curtis 1206HB
CAN enabled
Yes
Bluetooth app programming
Yes, Navitas app
On-The-Fly programmer
Included
Regenerative braking
Yes
Controller sealing
IP65 (Navitas TAC2)
Condition
New
Warranty
24 months from ship date

Shipping weight and box dimensions are confirmed before dispatch.

Requirements and install notes

  1. This is a full drivetrain conversion. The DC motor and the stock controller both come out, and the Navitas AC motor and TAC2 controller go in.

  2. Disconnect the battery pack and discharge the controller before you touch any terminal. Follow the Navitas TAC2 installation manual step by step.

  3. Check the main battery cables, terminals and solenoid before installation. Worn wiring limits what any AC system can deliver.

  4. The On-The-Fly programmer lets the driver adjust speed, acceleration and regenerative braking on the move, with a key lock to hold the settings. Deeper settings are adjusted in the Navitas app over Bluetooth.

  5. Plan on a half day or more for a first-time install. If you are not comfortable working on a 48V traction system, have the kit installed by a qualified golf cart technician.

  6. A run/tow switch mounting plate is included for the TXT installation.

FAQ

Which E-Z-GO carts does this kit fit?

The 48V lead-acid E-Z-GO TXT with the Curtis 1206HB controller. It does not fit a TXT ELiTE with factory Samsung lithium, a 36V TXT, or an RXV, which is already AC.

Does the kit include a motor?

Yes. Choose 440A with a 4kW motor or 600A with a 5kW motor. Both kits have the TAC2 CAN controller, TAC2 module, On-The-Fly programmer, mounting kit, run/tow switch plate, motor phase cable and motor sensor cable.

How do I check my controller?

Read the controller label. It must say Curtis 1206HB. A different label means a different kit.

How do I set it up?

The controller is programmed in the Navitas app on a phone or tablet, over Bluetooth, before the cart will drive. After that, the On-The-Fly programmer changes speed, acceleration and regenerative braking from the seat, with a key lock to hold your settings.

Other options

Other upgrade paths for the carts this kit fits. Each one names the cart it is listed for.

Warranty

Navitas TAC2 AC systems carry a 24 month warranty from the ship date, handled by us. Proof of purchase is required. Labour, damage from incorrect installation, wrong voltage, overload and non-OEM part substitution are not covered. See our returns and refunds policy for the full process.

Manufacturer part reference

Manufacturer part number
10-000891-27
GCL SKU
GCL-NAV-TAC2-DC-AC-KIT-EZGO-TXT48

Reviews

There are no reviews yet.

Be the first to review “Navitas TAC2 DC to AC Conversion Kit for E-Z-GO TXT 48V (Replaces Curtis 1206HB)”

Your email address will not be published. Required fields are marked *