Brand newGenuine Curtis
Curtis 1268-5411 400A Controller Kit for E-Z-GO ST400, MPT 1000 and Shuttle 2, Replaces Curtis 1264
4.9Lab rated
Black Friday price, ends Nov 30.
You save $30 (1%)
- Fits E-Z-GO ST400, MPT and Shuttle with the Curtis 1264.
- Swap a failed 1264 for a new Curtis 1268.
- Adapter harness included, made for this swap.
- 400A, 36-48V with installation instructions.
- New Curtis 1268-5411 SepEx controller.
Secure payments
Pay over time with Klarna on eligible orders. Express payment options available at checkout.
- Free shipping over $199, lower 48
- 30 day returns
- Email support
Overview
This kit replaces the Curtis 1264 controller on E-Z-GO ST400 vehicles built from 2002 on, and on the E-Z-GO MPT 1000, Shuttle 2 and Cushman utility vehicles that use the same controller. It contains a new Curtis 1268-5411 SepEx controller rated 400A at 36 to 48V, an adapter harness and installation instructions.
Utility vehicle dead with a failed Curtis 1264? The kit puts a new Curtis 1268 in its place, with an adapter harness made for the swap, so the vehicle goes back to work on its own motor and solenoid.
Want more power than stock? The Navitas TSX 3.0 kit for E-Z-GO 48V carts with the Curtis 1268 or 1264 replaces the same controller and adds Bluetooth programming.
- Controller
- 400A
In the box
- Curtis 1268-5411 SepEx controller, 400A, 36-48V (Curtis part number 611173)
- Adapter harness for the 1264 to 1268 swap
- Installation instructions
Manuals and documents
Compatibility
Fits
4 cart setups| Cart | Years | Pack voltage | Stock controller | Notes |
|---|---|---|---|---|
| E-Z-GO ST400 electric | 2002 and up | 36V to 48V | Curtis 1264 | Adapter harness included |
| E-Z-GO MPT 1000 electric | 2002 and up | 36V to 48V | Curtis 1264 | Identify by controller |
| E-Z-GO Shuttle 2 electric | 2002 and up | 36V to 48V | Curtis 1264 | Identify by controller |
| Cushman Electric utility vehicles | 2002 and up | 36V to 48V | Curtis 1264 | Identify by controller |
Does not fit
| Your cart | Get this instead |
|---|---|
| Vehicles whose controller label reads something other than Curtis 1264 | Email us and we will match it |
| E-Z-GO TXT golf carts with the PDS, DCS or 1206HB controller | Email us and we will match it |
| E-Z-GO RXV and other AC drive carts | Email us and we will match it |
| Gas vehicles | Email us and we will match it |
Want to be 100% sure?2 quick checks at the cart
Read the label on your controller. A Curtis 1264 (for example 1264-5407, or E-Z-GO part 73098-G04) means this kit applies.
Unsure? Send us a photo of the controller label and we will check it for you.
Specifications
- Brand
- Curtis
- Kit part number
- 8318
- Controller part number
- 1268-5411 (Curtis 611173)
- Type
- Curtis SepEx DC motor controller
- Rated current
- 400A
- Voltage
- 36-48V
- Replaces
- Curtis 1264 (1264-5407)
- OEM cross reference
- E-Z-GO 73098-G04, Curtis 615551, Curtis 611173
- Adapter harness
- Included
- Installation instructions
- Included
- Condition
- New
Requirements and install notes
Switch the vehicle to Tow and disconnect the battery pack before you touch any terminal.
Label each heavy cable before you take it off the old controller, so every one goes on the matching post of the new one.
Test the motor and the main solenoid before fitting. A shorted motor or a failed solenoid is the usual reason a replacement controller fails early.
Fit the adapter harness as the included instructions show, and check every connector for corroded, loose or burnt pins.
If you are not comfortable working on a traction system, have the kit fitted by a qualified technician.
FAQ
Which E-Z-GO vehicles does it fit?
E-Z-GO ST400 electric vehicles from 2002 on, and the MPT 1000, Shuttle 2 and Cushman utility vehicles that use the Curtis 1264 controller. It does not fit TXT, PDS or RXV golf carts.
What is in the box?
A new Curtis 1268-5411 400A controller, an adapter harness made for the swap and installation instructions. Your motor and solenoid stay on the vehicle.
Why a Curtis 1268 for a vehicle that had a 1264?
This kit pairs a new Curtis 1268 with an adapter harness made for the 1264 position, so it takes the place of the 1264 on these vehicles.
Can I fit it myself?
Yes, if you are comfortable working on a traction system. Follow the included instructions and test the motor and solenoid first. Otherwise have a qualified technician fit it.
Curtis 1268 or Navitas TSX 3.0?
This kit puts a new Curtis 1268-5411 in place of a failed 1264. The Navitas TSX 3.0 kit for E-Z-GO carts with the Curtis 1268 or 1264 replaces the same controller and adds Bluetooth programming.
Warranty
This part is new and covered by our returns and refunds policy. Returns and refunds · Shipping policy