Brand newGenuine Reliance
Reliance High Speed Motor for E-Z-GO Series 36V and 48V, 19 Spline
4.7Lab rated
Black Friday price, ends Nov 30.
You save $128 (13%)
- Fits E-Z-GO series carts, 36V and 48V.
- Up to 20 mph at 48V with an upgraded controller.
- 8 HP peak, up to 25% more torque.
- Direct factory replacement, 19 spline.
- Replaces D-31, HT-D297, ADC 6-244C. 1 year warranty.
Secure payments
Pay over time with Klarna on eligible orders. Express payment options available at checkout.
- Free shipping over $199, lower 48
- 30 day returns
- Email support
Overview
This Reliance high speed motor is a direct factory motor replacement for E-Z-GO series carts on 36V or 48V. It has a 19 spline coupler and replaces the D-31, HT-D297 and ADC 6-244C.
What do you gain? With an upgraded controller it gives speeds up to 20 mph at 48V, up to 25% more torque and 8 HP peak at 48V. Results also depend on the condition of the cart.
Does it need a new controller? Yes, for the quoted performance. It is made to work with stock factory controllers and with aftermarket controllers programmed with a field map for this motor, such as the Navitas TSX 3.0 440A or 600A. An incorrectly programmed controller can damage the motor and voids the warranty.
It is not a replacement for DCS, PDS, sepex or shunt motors.
- Voltage
- 36V or 48V
In the box
- One Reliance 36V/48V high speed series motor, 19 spline coupler, new
The controller, solenoid and cables on your cart are not included.
Manuals and documents
Compatibility
Fits
3 cart setups| Cart | Years | Pack voltage | Replaces | Notes |
|---|---|---|---|---|
| E-Z-GO Marathon, series | 1989 to 1994 | 36V or 48V | D-31, HT-D297, ADC 6-244C | 19 spline |
| E-Z-GO TXT, series | Identify by motor | 36V or 48V | D-31, HT-D297, ADC 6-244C | 19 spline |
| E-Z-GO Medalist, series | Identify by motor | 36V or 48V | D-31, HT-D297, ADC 6-244C | 19 spline |
Does not fit
| Your cart | Get this instead |
|---|---|
| E-Z-GO DCS or PDS carts | AMD stock motor for E-Z-GO TXT PDS and DCS |
| E-Z-GO with a sepex or shunt motor | AMD stock motor for Club Car IQ and i2 Excel |
| E-Z-GO RXV and other AC carts | AC motor for E-Z-GO RXV |
| Gas carts | Email us and we will match it |
Want to be 100% sure?2 quick checks at the cart
Check that your E-Z-GO has a series motor. A series motor has four terminals marked A1, A2, S1 and S2. F1 and F2 terminals mean a DCS, PDS or shunt motor, which this does not replace.
Unsure? Send us a photo of the motor label and terminals and we will check it for you.
Complete your install
Add what you need from here. Each item goes in your cart at its own price.
Extras for this install
Not needed to run it. Add only what you want.
- Navitas TSX 3.0 Controller Kit for E-Z-GO Series ITS 36V or 48V (Replaces Series Controllers), 440A or 600A
For E-Z-GO series carts with the ITS throttle. This motor supports Navitas controllers.
From $765.00Choose options
Specifications
- Brand
- Reliance
- SKU / MPN
- 25-514
- Type
- Series wound DC motor, high speed
- Spline
- 19 spline coupler
- With upgraded controller
- Up to 20 mph at 48V, up to 25% more torque, 8 HP peak at 48V
- Replaces
- D-31, HT-D297, ADC 6-244C
- Warranty
- 1 year (Reliance)
- Condition
- New
Requirements and install notes
Disconnect the battery pack and set the cart to Tow before you touch any terminal.
Label each cable before you take it off the old motor, so every one goes back on the same terminal.
Use a stock factory controller or an aftermarket controller programmed for this motor. A wrong field map can damage it and voids the warranty.
Break the motor in: drive 8 to 10 miles at varying speeds with gentle acceleration, and in the first 30 minutes check the motor temperature every 10 minutes. If the end bell is too hot to touch, stop and let it cool.
If you are not comfortable doing a motor swap, have a qualified golf cart technician fit it.
FAQ
Which carts does it fit?
E-Z-GO carts with a series motor on 36V or 48V, such as the Marathon from 1989 to 1994. Not DCS, PDS, sepex or shunt carts.
How fast will it go?
Up to 20 mph at 48V with an upgraded controller, with up to 25% more torque.
Which controller should I use?
A stock factory controller, or an aftermarket controller with a field map for this motor, such as the Navitas TSX 3.0 440A or 600A.
How do I break it in?
Drive 8 to 10 miles at varying speeds with gentle acceleration, checking the motor temperature every 10 minutes in the first 30 minutes.
Speed motor or torque motor?
This is a high speed motor: up to 20 mph at 48V, up to 25% more torque and 8 HP peak with an upgraded controller. A high torque motor trades top speed for more pull on hills and big tires.
Warranty
The Reliance motor includes a 1 year warranty. Returns and refunds · Shipping policy


