Images are for reference only. Use the spec table for part numbers.
Brand newGenuine AMD
AMD High Torque Series Motor for E-Z-GO and Yamaha, 19 Spline, 36V and 48V
4.8Lab rated
Black Friday price, ends Nov 30.
You save $30 (3%)
- Fits E-Z-GO Marathon, TXT and Medalist series; Yamaha G8, G9, G14, G16.
- High torque: 8 HP on 36V, 11.4 HP on 48V.
- 19 spline coupler.
- For lifted carts, hills and loads.
- Needs a 400A+ controller, heavy duty solenoid and F/R switch.
Secure payments
Pay over time with Klarna on eligible orders. Express payment options available at checkout.
- Free shipping over $199, lower 48
- 30 day returns
- Email support
Overview
This AMD high torque series motor fits E-Z-GO Marathon carts from 1989 to 1994, E-Z-GO TXT and Medalist series carts from 1994 on, and Yamaha G8, G9, G14 and G16. It has a 19 spline coupler and makes 8 HP at 1600 rpm on 36V or 11.4 HP at 2300 rpm on 48V.
What else does it need? A controller of at least 400A, 4 gauge cables throughout, a heavy duty solenoid and a heavy duty F and R switch.
DCS or PDS cart? It is not for those. They use a different motor type.
- Voltage
- 36V or 48V
In the box
- One AMD high torque series motor, 19 spline coupler, new
The controller, solenoid and cables on your cart are not included.
Compatibility
Fits
7 cart setups| Cart | Years | Pack voltage | Replaces | Notes |
|---|---|---|---|---|
| E-Z-GO Marathon, series | 1989 to 1994 | 36V or 48V | Stock series motor | 19 spline |
| E-Z-GO TXT, series | 1994 and up | 36V or 48V | Stock series motor | 19 spline |
| E-Z-GO Medalist, series | 1994 and up | 36V or 48V | Stock series motor | 19 spline |
| Yamaha G8 | Identify by motor | 36V or 48V | Stock series motor | 19 spline |
| Yamaha G9 | Identify by motor | 36V or 48V | Stock series motor | 19 spline |
| Yamaha G14 | Identify by motor | 36V or 48V | Stock series motor | 19 spline |
| Yamaha G16 | Identify by motor | 36V or 48V | Stock series motor | 19 spline |
Does not fit
| Your cart | Get this instead |
|---|---|
| E-Z-GO DCS or PDS carts and other regen carts | AMD stock motor for E-Z-GO TXT PDS and DCS |
| E-Z-GO with an AC motor, such as the RXV | AC motor for E-Z-GO RXV |
| Gas carts | Email us and we will match it |
Want to be 100% sure?2 quick checks at the cart
Check that your cart has a series motor. A series motor has four terminals marked A1, A2, S1 and S2. DCS and PDS carts have F1 and F2 terminals.
Unsure? Send us a photo of the motor label and terminals and we will check it for you.
Complete your install
Add what you need from here. Each item goes in your cart at its own price.
Extras for this install
Not needed to run it. Add only what you want.
- Curtis 1205M 500A Series Controller for E-Z-GO TXT and Medalist ITS, 36V and 48V
This motor needs at least 400A. This 500A Curtis fits E-Z-GO TXT and Medalist series carts with the ITS throttle.
$1,046.00Add to cart - Curtis 1205M 500A Controller for Yamaha G14 and G16, 36V and 48V, 0-1K Throttle
This 500A Curtis fits the Yamaha G14 and G16.
$893.00Add to cart
You may need these
- Albright SW180B-845 36V Heavy-Duty Golf Cart Contactor With Bracket
This motor needs a heavy duty solenoid. This one has a 36V coil. Already have one? Skip it.
$184.00Add to cart - Albright SW180B-1125 48V Heavy-Duty Golf Cart Contactor With Bracket
This motor needs a heavy duty solenoid. This one has a 48V coil. Already have one? Skip it.
$159.00Add to cart
Specifications
- Brand
- AMD (Nidec Advanced Motors and Drives)
- SKU / MPN
- 7124
- Type
- Series wound DC motor, high torque
- Output at 36V
- 8 HP at 1600 rpm
- Output at 48V
- 11.4 HP at 2300 rpm
- Spline
- 19 spline coupler
- Required
- Controller of 400A or more, heavy duty solenoid and F/R switch, 4 gauge cables
- Condition
- New
Requirements and install notes
Disconnect the battery pack and set the cart to Tow before you touch any terminal.
Label each cable before you take it off the old motor, so every one goes back on the same terminal.
Fit a controller of at least 400A, a heavy duty solenoid and F and R switch, and 4 gauge cables throughout.
If you are not comfortable doing a motor swap, have a qualified golf cart technician fit it.
FAQ
Which carts does it fit?
E-Z-GO Marathon 1989 to 1994, E-Z-GO TXT and Medalist series carts from 1994, and Yamaha G8, G9, G14 and G16. Not DCS or PDS carts.
Is it a speed motor?
No. It is built for torque: 8 HP on 36V and 11.4 HP on 48V at low rpm.
What else do I need?
A controller of at least 400A, a heavy duty solenoid and F and R switch, and 4 gauge cables.
Torque motor or speed motor?
This is the torque motor: 8 HP at 1600 rpm on 36V and 11.4 HP at 2300 rpm on 48V. The AMD 7126 is the speed motor for E-Z-GO series carts, 6.1 HP at 5330 rpm.
Does it fit a DCS or PDS cart?
No. It is not for DCS or PDS cars.
Warranty
This motor is new and covered by our returns and refunds policy. Returns and refunds · Shipping policy



