Brand newGenuine Navitas
Navitas TSX 3.0 440A and High Torque Motor Kit for Yamaha G29 Drive 48V DC
4.6Lab rated
- Fits Yamaha G29 Drive, 48V DC.
- High Torque motor for hills, loads and big tires.
- Navitas TSX 3.0 440A made to drive it, with Bluetooth.
- Plugs into your cart’s wiring with the included harness.
- Kit: controller, motor, harness, heavy duty solenoid.
Out of stock
- Free shipping over $199, lower 48
- 30 day returns
- Email support
Overview
This kit upgrades 48V Yamaha G29 Drive carts with a DC motor in one order: a Navitas TSX 3.0 440A controller with Bluetooth, a Reliance high torque motor, the matching Navitas harness and a Bolt 48V heavy duty solenoid. With the upgraded controller the motor gives up to 18 mph, 12.3 HP peak, up to 70% more torque.
Cart slows down on hills, with a full load or on bigger tires? A high torque motor pulls harder from a stop and up grades. High torque can damage a stock controller, which is why the kit pairs the motor with a Navitas TSX 3.0.
Happy with your motor and only want a new controller? The Navitas TSX 3.0 controller kits swap the controller and keep your motor.
Will the motor fit under my cart? It is a direct factory motor replacement with a 19 tooth female spline. It is 12 inches long overall, so check the clearance before you fit it.
- Voltage
- 48V
- Controller
- 440A
- Bluetooth app
- Built in
Compatibility
Fits
2 cart setups| Cart | Years | Pack voltage | Stock controller | Notes |
|---|---|---|---|---|
| Yamaha G29 Drive, 48V DC | 2007 to 2016 | 48V | Stock DC controller (26 pin Moric) | Harness included |
| Yamaha Drive2, 48V DC | 2007 to 2016 | 48V | Stock DC controller | Harness included |
Does not fit
| Your cart | Get this instead |
|---|---|
| Yamaha Drive2 AC carts and other AC motor carts | Email us and we will match it |
| Yamaha G19, G22, G14 and G16 | Email us and we will match it |
| Gas carts | Email us and we will match it |
Want to be 100% sure?3 quick checks at the cart
Check the motor. This kit is for the DC motor on a 48V Yamaha G29 Drive, not the AC motor.
Measure the motor space: the new motor is 12 inches long overall.
Unsure? Send us a photo of the controller label and we will check it for you.
What's in the box
- Navitas TSX 3.0 440A 36-48V DC controller with Bluetooth
- Navitas TSX 3.0 harness for Yamaha G29 Drive (40-000513)
- Bolt 48V heavy duty solenoid (works on 36V)
- Reliance high torque motor, Yamaha G29 Drive, 19 tooth female spline
Specifications
- Brand
- Navitas controller, Reliance motor
- Kit part number
- 25-610
- Controller
- Navitas TSX 3.0 440A 36-48V DC controller with Bluetooth
- Motor
- Reliance high torque motor, Yamaha G29 Drive, 19 tooth female spline
- Motor length
- 12 inches overall
- Performance with this controller
- up to 18 mph, 12.3 HP peak, up to 70% more torque
- System voltage
- 48V
- Solenoid
- Bolt 48V heavy duty, 36V compatible
- Bluetooth app programming
- Yes, Navitas app
- Condition
- New
- Warranty
- Controller 24 months, motor 1 year
Requirements and install notes
The kit replaces the controller, motor and solenoid. The new controller plugs into your cart's existing wiring with the supplied harness.
The motor needs a controller set up for it. Using an incorrectly programmed controller can damage the motor and voids the warranty.
Break the motor in: drive 8 to 10 miles at varying speeds with gentle acceleration, and in the first 30 minutes check the motor temperature every 10 minutes. If the end bell is too hot to touch, stop and let it cool.
Disconnect the battery pack before you touch any terminal, and label each cable before you remove the old parts.
If you are not comfortable working on a 48V traction system, have the kit installed by a qualified golf cart technician.
FAQ
Which carts does it fit?
48V Yamaha G29 Drive carts with a DC motor, including the Drive2 with a DC motor. Yamaha Drive2 AC carts and other AC motor carts are not covered.
Does it include a motor?
Yes. A Reliance high torque motor comes with the TSX 3.0 440A controller, the harness and a heavy duty solenoid.
Why not keep my stock controller?
High torque motors can damage a stock controller. The Navitas TSX 3.0 in the kit is set up for the higher current and protects the motor from burn-out.
How do I break the motor in?
Drive 8 to 10 miles at varying speeds with gentle acceleration, checking the motor temperature every 10 minutes in the first 30 minutes. Stop if the end bell is too hot to touch.
440A kit or 600A kit?
Both use the same motor, harness and solenoid. Only the controller changes: this kit has the Navitas TSX 3.0 440A, and the 600A kit has the TSX 3.0 600A.
Warranty
The Reliance motor includes a 1 year warranty. Returns and refunds · Shipping policy



