Images are for reference only.
Brand newGenuine MadJax
MadJax Ultimate Plus LED Light Kit for Club Car Tempo (2018 and Up)
4.6Lab rated
- Fits the Club Car Tempo, 2018 and up, gas or electric.
- Complete kit: LED headlights, taillights, brake lights and horn.
- Sequential front turn signals that cancel themselves.
- Runs on 12 to 48 volts with the converter in the box.
- Dual USB port and a 12 volt accessory connection in the dash.
Secure payments
Pay over time with Klarna on eligible orders. Express payment options available at checkout.
- Free shipping over $199, lower 48
- 30 day returns
- Email support
Overview
This is the MadJax Ultimate Plus LED light kit for the Club Car Tempo, gas or electric, from 2018 on. It adds LED headlights with daytime running lights, LED taillights, brake lights, sequential front turn signals, a horn and a dual USB port, on a plug and play harness.
Driving at dusk or around traffic? Brake lights, turn signals and a horn let people around you see what you are about to do. The stalk sits where a car's does, so it feels natural from the first drive.
Want colour you can change? The LUX kit for the Tempo adds RGB daytime running lights you set from your phone. See the Does NOT fit list for the link.
Compatibility
Fits
| Cart | Years | Power | Notes |
|---|---|---|---|
| Club Car Tempo | 2018 and up | Gas or electric | Factory body |
Does not fit
| Your cart | Get this instead |
|---|---|
| Club Car Tempo or Precedent with a MadJax Alpha body | Ultimate Plus kit for the Alpha body |
| Club Car Precedent | Ultimate Plus kit for the Precedent |
| Club Car Onward | LUX LT headlight kit for the Onward |
| Want app-controlled RGB lights on the Tempo? | LUX RGB kit for the Tempo |
Want to be 100% sure?3 quick checks at the cart
Check that your cart is a Club Car Tempo from 2018 on with its factory body.
A Tempo with an Alpha body takes the Alpha kit: see the Does NOT fit list.
Unsure? Send us a photo of your cart from the front and its serial number.
What's in the box
- LED headlights and LED taillights
- Wiring harness and mounting hardware
- Turn signal indicator and steering column cover
- Hazard switch
- Control box
- Horn and brake switch
- USB charge port
- 48 to 12 volt converter
- Headlight cutout template
Specifications
- Brand
- MadJax
- Operation
- 12 to 48 volts, voltage converter included
- Beams
- High and low beam with automotive-style daytime running lights
- Turn signals
- Sequential front signals, self-canceling
- Stalk switches
- High/low beam, daytime running lights, 2-position accessory light switch (light bars, underbody lights), horn button
- Brake lights
- Mechanical brake switch with built-in brake light timer
- USB
- Dash-mounted dual 5 volt USB port, 1 amp and 2.1 amp
- Accessory output
- 7.5 amp 12 volt connection in the dash, for a radio or interior lights
- Gas or electric
- Both
- Condition
- New
- Control box
- 30 second turn signal timer, no flasher or relay needed, brake lights switch off 3 minutes after the parking brake is set
Requirements and install notes
Tools from the instructions: rotary cutting tool, sandpaper, power drill, 15/32 in drill bit, 1-1/8 in paddle bit, 1-1/2 in hole saw, Torx bit set, wire snake.
Turn the key off and set the RUN/TOW switch to TOW. The batteries can stay in, but disconnect the main negative.
Lay the harness in the middle floor channel from the battery compartment to the dash, with the brake leads to the brake compartment.
Cut the headlight openings in the cowl with the template and the cutout diagram, then mount the headlights. Red connectors go to the passenger side.
Drill a 1-1/2 in hole for each taillight, then fit the hazard switch, USB port (1-1/8 in), brake switch, stalk and horn.
Fit the voltage converter: Fit the voltage converter on every cart, gas or electric: red wire with the fuse to the main positive of the pack, black to the main negative, mounted flat under the seat (metal is best). On a gas cart it stops starter generator voltage spikes from damaging the lights.
The maker recommends professional installation. Take your time if you fit it yourself.
FAQ
Does it work on a 48 volt cart?
Yes. The kit runs on 12 to 48 volts through the voltage converter in the box, on gas and electric carts.
What does the kit add besides headlights?
LED taillights, brake lights, self-canceling turn signals, a horn, a hazard switch, a dual USB port and a 7.5 amp 12 volt accessory connection in the dash.
Do I have to cut the body?
Yes. The headlight openings are cut in the cowl with the supplied template, and each taillight needs a 1-1/2 in hole. The cutout diagram is under Manuals and documents.
What is the difference from the Tempo LUX kit?
The LUX kit adds an RGB module, so you set the colour, pattern and speed of the daytime running lights from your phone. The rest of the kit and the install are the same.
Does a light kit make my Tempo street legal?
Lights, signals and brake lights are part of what most local rules ask for, but the rules differ by state and town. Check yours before you drive on the road.
Warranty
This LED light kit is new and covered by our returns and refunds policy. Returns and refunds · Shipping policy
