Brand newGenuine MadJax
MadJax Ultimate Plus LED Light Kit for Club Car Precedent (2004 and Up)
4.8Lab rated
- Fits the Club Car Precedent, 2004 and up, gas or electric.
- Complete kit: LED light bar, taillights, turn signals, brake lights and horn.
- Two light bar styles: standard or automotive style.
- Runs on 12 to 48 volts with the converter in the box.
- Dual USB port and a 12 volt accessory connection in the dash.
Secure payments
Pay over time with Klarna on eligible orders. Express payment options available at checkout.
- Free shipping over $199, lower 48
- 30 day returns
- Email support
Overview
This is the MadJax Ultimate Plus LED light kit for the Club Car Precedent, gas or electric, from 2004 on. It replaces the front bumper light bar and adds LED taillights, brake lights, turn signals, a horn and a dual USB port, all from one plug-in harness.
Which light bar do you want? The standard bar has a row of clear LEDs across the bumper. The automotive-style bar has twin headlight lenses in a black housing. The rest of the kit is the same.
Driving at dusk or around traffic? Brake lights, turn signals and a horn let people around you see what you are about to do. The stalk sits where a car's does, so it feels natural from the first drive.
Manuals and documents
Compatibility
Fits
| Cart | Years | Power | Notes |
|---|---|---|---|
| Club Car Precedent | 2004 and up | Gas or electric | Factory body and front bumper |
Does not fit
| Your cart | Get this instead |
|---|---|
| Club Car Precedent or Tempo with a MadJax Alpha body | Ultimate Plus kit for the Alpha body |
| Club Car Tempo | Ultimate Plus kit for the Tempo |
| Club Car Onward | LUX LT headlight kit for the Onward |
| Club Car DS | Email us and we will match it |
Want to be 100% sure?4 quick checks at the cart
Check that your cart is a Club Car Precedent from 2004 on with its factory body and bumper.
An Alpha body, Tempo or Onward takes a different kit: see the Does NOT fit list.
Pick the light bar style you want.
Unsure? Send us a photo of your cart from the front and its serial number.
What's in the box
- LED light bar (the style you pick) on its bumper and LED taillights
- Automotive-style turn signal stalk and steering column cover
- Dual 5 volt USB charging port, 1 amp and 2.1 amp
- Hazard switch and horn
- Brake switch
- 48 to 12 volt converter
- Wiring harness, installation hardware and templates for cut-in lights (where the cart needs them)
Specifications
Compare options
| Specification | Standard LED light bar | Automotive-style LED light bar |
|---|---|---|
| Part number | 02-045 | 02-044 |
| Light bar | Clear multi-LED bar | Twin headlight lenses, black housing |
- Brand
- MadJax
- Operation
- 12 to 48 volts, voltage converter included
- Beams
- High and low beam with automotive-style daytime running lights
- Turn signals
- Self-canceling, from the turn signal stalk
- Stalk switches
- High/low beam, daytime running lights, 2-position accessory light switch (light bars, underbody lights), horn button
- Brake lights
- Mechanical brake switch with built-in brake light timer
- USB
- Dash-mounted dual 5 volt USB port, 1 amp and 2.1 amp
- Accessory output
- 7.5 amp 12 volt connection in the dash, for a radio or interior lights
- Gas or electric
- Both
- Condition
- New
Requirements and install notes
Tools from the instructions: #2 Phillips bit, power drill, 15/32 in drill bit, 1-1/8 in paddle bit, 1-1/2 in hole saw, 10 mm socket and ratchet, 13 mm wrench, cutting tool, sandpaper.
Turn the key off and set the RUN/TOW switch to TOW. The batteries can stay in, but disconnect the main negative.
Take off the floor mat, the brake adjustment access panel, the front body screws, the charge receptacle cover and the lower body trim.
Route the harness from the battery compartment along the floor channel to the dash and plug it into the factory 12-pin harness. Mount the hazard switch (15/32 in hole) and the USB port (1-1/8 in hole) in the dash.
Swap the factory bumper for the new light bar bumper on the two frame bolts. The top holes are slotted so you can aim the headlights.
Drill a 1-1/2 in hole for each taillight, test fit, clean the body and mount them with the tape and eight screws. Fit the brake switch on the brake rod, the stalk on the steering column and the horn under the front cowl.
On a 36 or 48 volt electric cart the voltage converter must be used: red wire with the fuse to the pack positive, black to the negative, mounted under the seat. A gas cart does not need it. The maker recommends professional installation. Take your time if you fit it yourself.
FAQ
What is the difference between the two options?
Only the front light bar. The standard bar has a clear multi-LED lens, the automotive style has twin headlight lenses in a black housing.
Does it work on a 48 volt cart?
Yes. It runs on 12 to 48 volts with the voltage converter in the box. On a 36 or 48 volt electric Precedent the converter must be used. A gas Precedent does not need it.
What does the kit add besides headlights?
LED taillights, brake lights, self-canceling turn signals, a horn, a hazard switch, a dual USB port and a 7.5 amp 12 volt accessory connection in the dash.
Do I have to drill the body?
Yes, a little. Each taillight needs a 1-1/2 in hole, and the hazard switch and USB port each need a hole in the dash. The light bar bolts on in place of the factory bumper.
Does it fit a Precedent with an Alpha body?
No. The MadJax Alpha body has its own Ultimate Plus and LUX light kits, which we also list.
Warranty
This LED light kit is new and covered by our returns and refunds policy. Returns and refunds · Shipping policy
Manufacturer part reference
- GCL SKU
- GCL-MADJAX-ULTIMATE-PLUS-PRECEDENT
