Brand newGenuine Lester
Lester TT-650W 48V 13.5A Charger with Ring Terminal DC Cord
4.7Lab rated
Black Friday price, ends Nov 30.
You save $30 (5%)
- Ring terminal cord for 48V packs wired directly.
- Lead-acid and lithium capable, 13.5A, 650W.
- Sealed and fanless: IP66, NEMA 4.
- 6.25 ft cord, AC cord and brackets included.
- Made in the USA by Lester. USB port for updates.
Secure payments
Pay over time with Klarna on eligible orders. Express payment options available at checkout.
- Free shipping over $199, lower 48
- 30 day returns
- Email support
Overview
The Lester TT-650W is a 48V, 13.5A, 650W golf cart battery charger, and this kit comes with the 6.25 ft DC cord with ring terminals, so it connects straight to a 48V cart or battery pack wired directly. It is a sealed, fanless switch mode charger, designed and built by Lester Electrical in the USA.
Wiring a charger into a fixed install? The ring terminal cord bolts to the pack, and the TT-650W mounts on board or on a shelf. Plug the AC cord into a grounded outlet and the charge cycle starts on its own. The cord has four 16 gauge stranded copper conductors in a wear and UV resistant jacket, rated for 18 to 22 amps and up to 90°C. Lester covers the charger for 4 years and the cord for 1 year.
Moved to lithium, or planning to? Lester built the TT-650W for lead-acid (wet, AGM, TPPL and gel) and lithium (LiFePO4, NMC and others) packs, with CAN bus and a two-wire BMS wake-up for lithium systems. Each charger leaves Lester set to one battery profile, so tell us your battery make and type when you order and we confirm the profile matches them.
Cart lives outside or in a cold garage? The case is sealed to IP66 and NEMA 4, the electronics are encapsulated and there is no fan to clog with dust. Lester rates it to run from -25°C to 50°C.
- Voltage
- 48V
Manuals and documents
Compatibility
Fits
| Use | Details | Pack voltage | Connection |
|---|---|---|---|
| Any 48V cart or pack wired directly | Any | 48V | Ring terminals |
Does not fit
| Your cart | Get this instead |
|---|---|
| Packs of any voltage other than 48V | Email us and we will match it |
| Carts with a plug-in charging receptacle | Email us and we will match it |
Want to be 100% sure?3 quick checks at the cart
Measure the resting pack voltage and check it is a 48V system.
Check the pack is wired for a direct ring terminal connection.
Send us a photo of the receptacle and the battery label if you are unsure.
What's in the box
- One Lester TT-650W 48V 13.5A battery charger
- DC cord with ring terminals, 75 inch (6.25 ft)
- AC cord
- Mounting brackets
Specifications
- Brand
- Lester Electrical
- Part number
- 07-043
- Charger
- Lester TT-650W, model 33000 (48V / 13.5A)
- Pack voltage
- 48V
- Charge current
- 13.5A
- Output power
- 650W
- Output voltage, maximum
- 72 Vdc
- Battery types
- Lead-acid (wet, AGM, TPPL, gel), lithium (LiFePO4, NMC and others), custom
- AC input
- 100 to 240 Vac rated (90 to 265 Vac operating), 50 to 60 Hz, single phase, under 8A
- Efficiency
- Above 90% peak (DOE test procedure, 115 Vac)
- Protection
- Current limit, short circuit, reverse polarity, under voltage and over voltage
- Enclosure
- IP66, NEMA 4, encapsulated electronics
- Cooling
- Natural convection, no fan
- Operating temperature
- -25°C to 50°C
- Storage temperature
- -40°C to 85°C (-40°F to 185°F)
- Size (L x W x H)
- 12.06 x 4.13 x 5.35 in (305 x 104 x 136 mm), without brackets and handle
- Weight
- 10 lb (4.54 kg)
- Connector
- Ring terminals
- DC cord
- 75 inch (6.25 ft), four 16 gauge copper conductors, rated to 90°C
- Charger DC connector
- 8-pin Deutsch
- AC inlet
- IEC 60320 C14 with cord clamp
- Status light
- RGB LED
- USB
- USB-A port for software and profile updates, charge history and data logging
- Communication
- CAN bus (CANopen, SAE J1939, CAN 2.0), two-wire BMS wake-up
- Mounting
- On-board or shelf
- Standards
- DOE and CEC efficiency; FCC Part 15 and ICES-003 Class A; designed to UL 1564 and CAN/CSA C22.2 No. 107.2-01
- Made in
- USA
- Condition
- New
- Warranty
- 4 years on the charger, 1 year on the cord (Lester)
Requirements and install notes
Check the pack voltage at the pack, not at a single battery: the TT-650W is for 48V packs only.
Before the first charge, confirm the charger's battery profile matches your batteries.
On the cart, Lester recommends bolting the charger base to a metal plate at least 0.1 in (2.5 mm) thick for strong mounting and cooling.
Plug the AC cord into a properly grounded outlet. If you need an extension cord, Lester calls for a 3-conductor, 14 AWG or heavier cord.
Never unplug the DC plug from the cart while it is charging: unplug the AC cord first.
Charge in a ventilated area and follow the battery manufacturer's instructions.
FAQ
What is the ring terminal version of the Lester TT-650W for?
It is for 48V carts and battery packs wired straight to the charger instead of through a plug-in receptacle, such as a fixed on-board install. If your cart has a charging receptacle, a TT-650W kit with the plug for that receptacle is the better fit.
What comes in the box?
The Lester TT-650W charger, the 6.25 ft DC cord with ring terminals, an AC cord and mounting brackets.
Will the TT-650W charge lithium batteries?
Yes. Lester lists lead-acid (wet, AGM, TPPL and gel) and lithium (LiFePO4, NMC and others) battery types, and the charger has CAN bus and BMS wake-up for lithium packs. It ships set to one battery profile, so tell us your battery make and type when you order and we confirm it matches.
Lester TT-650W or Lester Summit Series II 650W?
The TT-650W is 48V only, has a USB port for updates and no phone app, and is made in the USA. The Summit Series II 650W charges 36V or 48V packs on its own and shows the charge on your phone over Bluetooth. Both are 650W chargers sealed to IP66.
How long is the warranty?
4 years on the charger and 1 year on the DC cord, from Lester.
Warranty
Lester covers the charger for 48 months and the DC cord for 1 year. Returns and refunds · Shipping policy