Brand newGenuine Lester
Lester Summit Series II 650W 36/48V Charger with 5/16 Inch Ring Terminals and QD Lockout, 6 Ft
4.8Lab rated
Black Friday price, ends Nov 30.
You save $30 (4%)
- Ring terminals for 36V or 48V packs wired directly.
- 36V or 48V, detected automatically.
- Charges lithium, AGM, gel and flooded packs.
- Bluetooth app shows the charge on your phone.
- Sealed IP66, fanless. 6 ft wires.
Secure payments
Pay over time with Klarna on eligible orders. Express payment options available at checkout.
- Free shipping over $199, lower 48
- 30 day returns
- Email support
Overview
The Lester Summit Series II 650W is a 36V and 48V golf cart battery charger with Bluetooth, and this one comes with 5/16 inch ring terminals with QD lockout on 6 ft wires, for any 36V or 48V cart or battery pack you wire straight to the charger. It is a sealed, fanless switch mode charger from Lester Electrical.
Wiring a charger into a fixed install? The ring terminals bolt to the pack, and the QD lockout lead connects to the vehicle lockout control described in the Lester manual. Four lights on the case show AC present, charge status, charge complete and faults, and the ChargerConnect app shows the same on your phone over Bluetooth. Lester covers it for 48 months.
Switching to lithium, or mixing carts? The Summit Series II carries battery profiles for flooded, AGM and gel packs and works with lithium. Each charger leaves Lester set to one profile; you check it, or pick another, in the free ChargerConnect app before the first charge, and new profiles download from Lester over the app. It detects a 36V or 48V pack on its own.
Charging outside or in a cold garage? The case is sealed to IP66 and NEMA 4 with no fan, and Lester rates it to run from -25°C to 60°C (-13°F to 140°F).
- Voltage
- 36V or 48V
- Bluetooth app
- Built in
In the box
- One Lester Summit Series II 650W 36/48V battery charger
- 5/16 inch ring terminals with QD lockout on 6 ft wires
Compatibility
Fits
| Use | Details | Pack voltage | Connection |
|---|---|---|---|
| Any 36V or 48V cart or pack wired directly | Any | 36V or 48V | 5/16 in ring terminals, QD lockout |
Does not fit
| Your cart | Get this instead |
|---|---|
| Carts with a plug-in charging receptacle | Email us and we will match it |
Want to be 100% sure?3 quick checks at the cart
Check the pack is 36V or 48V.
Check the pack is wired for a direct ring terminal connection.
Send us a photo of the receptacle and the battery label if you are unsure.
Specifications
- Brand
- Lester Electrical
- Part number
- 3721
- Charger
- Lester Summit Series II 650W, 36-48V model (30600)
- Pack voltage
- 36V or 48V, detected automatically (Auto Voltage Mode)
- Charge current
- 18A at 36V, 13.5A at 48V
- Output power
- 650W
- Output voltage, maximum
- 54 Vdc (36V), 72 Vdc (48V)
- Battery types
- Lead-acid (wet, AGM, gel), lithium, custom
- AC input
- 100 to 240 Vac rated (85 to 265 Vac operating, reduced power below 108 Vac), 50 to 60 Hz, single phase, under 8A
- Efficiency
- Above 90% peak (DOE test procedure, 115 Vac)
- Protection
- Current limit, short circuit, reverse polarity, under voltage, over voltage, wrong battery voltage
- Enclosure
- IP66, NEMA 4
- Cooling
- Natural convection, no fan
- Operating temperature
- -25°C to 60°C (-13°F to 140°F)
- Storage temperature
- -40°C to 85°C (-40°F to 185°F)
- Size (L x W x H)
- 11.297 x 7.171 x 3.641 in (287 x 182 x 93 mm), without the removable feet
- Weight
- 8.43 lb (3.82 kg)
- Connector
- 5/16 inch ring terminals with QD lockout
- DC cord
- 6 ft
- Status lights
- Charge complete (green), charge status (yellow), AC present (blue), fault (red)
- Bluetooth
- ChargerConnect app for Apple and Android phones and tablets
- Communication
- CAN bus (CANopen and SAE J1939), single wire lockout, battery temperature input
- AC inlet
- IEC 60320 C16 with cord clamp
- Mounting
- Shelf, wall, bulkhead, threaded rod or hook
- Standards
- DOE and CEC efficiency, NRCan; UL recognized/listed, cUL, FCC Part 15, ICES-003, CE, RCM
- Condition
- New
- Warranty
- 48 months (Lester)
Requirements and install notes
Before the first charge, open the ChargerConnect app and check the active battery profile matches your batteries.
On the cart, Lester recommends bolting the charger base to a metal plate at least 0.1 in (2.5 mm) thick for strong mounting and cooling.
Plug the AC cord into a properly grounded outlet. If you need an extension cord, Lester calls for a 3-conductor, 14 AWG or heavier cord.
Never unplug the DC plug from the cart while it is charging: unplug the AC cord first.
Charge in a ventilated area and follow the battery manufacturer's instructions.
FAQ
What is the ring terminal version of the Summit II for?
It is for 36V or 48V carts and battery packs wired straight to the charger, such as a fixed on-board install, with 5/16 inch ring terminals and a QD lockout lead on 6 ft wires. If your cart has a charging receptacle, a version with the plug for that receptacle is the better fit.
Does it charge 36V and 48V packs?
Yes. In Auto Voltage Mode it detects the pack voltage on its own: 18A on a 36V pack and 13.5A on a 48V pack.
Will the Lester Summit Series II charge lithium batteries?
Yes. Lester lists lead-acid (wet, AGM and gel), lithium and custom battery types. The charger leaves Lester set to one battery profile, so check it or pick yours in the ChargerConnect app before the first charge. If your lithium brand is not in the app, tell us your battery make and we confirm the right profile.
Lester Summit Series II 650W or Lester TT-650W?
The Summit Series II 650W charges 36V or 48V packs and shows the charge on your phone over Bluetooth. The TT-650W is 48V only, has a USB port instead of an app, and is made in the USA. Both are 650W chargers sealed to IP66.
How long is the warranty?
48 months, from Lester.
Warranty
Lester covers the Summit Series II for 48 months from the date it ships. Returns and refunds · Shipping policy