Images are for reference only.
Brand newGenuine MadJax
MadJax Brush Guard for the Havoc Body Kit on Yamaha G29 Drive
4.8Lab rated
- Fits the G29 Drive with the MadJax Havoc body.
- Armor textured powder coat.
- Needs an A-arm or drop axle lift, 3 in or more.
- Not for spindle lifts.
Secure payments
Pay over time with Klarna on eligible orders. Express payment options available at checkout.
- Free shipping over $199, lower 48
- 30 day returns
- Email support
Overview
This is the MadJax brush guard for the Yamaha G29 Drive from 2007 to 2016 with the MadJax Havoc body kit. It has a durable armor textured powder coat and a laser cut MadJax logo.
Built your Drive into a Havoc? The guard finishes the aggressive front end and takes the knocks.
Lift needed: the maker recommends a MadJax A-arm or drop axle lift kit of 3 inches or more. It will not work with spindle lift kits.
In the box
- MadJax Havoc brush guard
Manuals and documents
Compatibility
Fits
| Cart | Years | Gas or electric | Notes |
|---|---|---|---|
| Yamaha G29 Drive with the MadJax Havoc body | 2007 to 2016 | Gas or electric | A-arm or drop axle lift of 3 in or more |
Does not fit
| Your cart | Get this instead |
|---|---|
| Carts with a spindle lift kit | |
| Yamaha G29 Drive with the factory body | Jake's brush guard for the G29 Drive |
Want to be 100% sure?3 quick checks at the cart
Check that your Drive wears the MadJax Havoc body.
Check your lift: A-arm or drop axle, 3 inches or more, not a spindle lift.
Unsure? Send us a photo of the front of your cart.
Specifications
- Brand
- MadJax
- Finish
- Armor textured powder coat
- Logo
- Laser cut MadJax logo
- Lift
- A-arm or drop axle lift, 3 in or more recommended
- Condition
- New
Requirements and install notes
Tools: 10 mm and 17 mm sockets, 17 mm wrench.
Remove the factory bumper mount bolts (10 mm) and keep them.
Fit the guard to the frame and bumper mounts, hand tight, then tighten the OEM bumper mount bolts and the guard bolts.
FAQ
Does it need a lift kit?
The maker recommends a MadJax A-arm or drop axle lift kit of 3 inches or more so it fits properly.
Will it work with a spindle lift?
No.
Does it fit the factory Drive body?
No, it is shaped for the Havoc body. For the factory body we list a Jake's brush guard.
What finish does it have?
Armor textured powder coat with a laser cut logo.
Is it new?
Yes.
Warranty
This brush guard is new and covered by our returns and refunds policy. Returns and refunds · Shipping policy