Images are for reference only.
Brand newGenuine Jake's
Jake's Black Brush Guard for Yamaha G29 Drive (2007 to 2016)
4.6Lab rated
- Fits the Yamaha G29 Drive, 2007 to 2016.
- Protects the front cowl and headlights.
- High-gloss black powder coat.
- Made in the U.S.A.
Secure payments
Pay over time with Klarna on eligible orders. Express payment options available at checkout.
- Free shipping over $199, lower 48
- 30 day returns
- Email support
Overview
This is a Jake's front brush guard for the Yamaha G29 Drive from 2007 to 2016, gas or electric. Its rounded design follows the lines of the body and it has a high-gloss black powder-coated finish.
Driving through brush, trails or tight spaces? The guard protects the front cowl and headlights from branches and knocks, and gives the cart a rugged look.
Cut-in headlights on your Drive? The guard looks great with them and leaves the lights clear.
In the box
- Jake's front brush guard, black
Compatibility
Fits
| Cart | Years | Gas or electric |
|---|---|---|
| Yamaha G29 Drive | 2007 to 2016 | Gas or electric |
Does not fit
| Your cart | Get this instead |
|---|---|
| Yamaha Drive2 | Jake's brush guard for the Drive2 |
| Yamaha G14 to G22 | Jake's brush guard for the G14 to G21 |
| G29 Drive with the MadJax Havoc body | Havoc brush guard |
Want to be 100% sure?2 quick checks at the cart
Check that your cart is a Yamaha G29 Drive from 2007 to 2016.
Unsure? Send us a photo of the front of your cart and its serial number.
Specifications
- Brand
- Jake's
- Finish
- High-gloss black powder coat
- Protects
- Front cowl and headlights
- Made in
- U.S.A.
- Condition
- New, closeout
Requirements and install notes
Set the cart on level ground with the key off.
Bolt the guard to the front of the frame at the factory mounting points, hand tight.
Line it up with the body, then tighten every bolt.
FAQ
Is it made in the USA?
Yes. Jake's builds it in the U.S.A.
What finish does it have?
High-gloss black powder coat.
Will it fit my cart?
It fits the Yamaha G29 Drive from 2007 to 2016 shown in the fit table. If yours is not listed, email us before you order and we will check it.
Does it fit the Drive2?
No. The Drive2 front is shaped differently; we list a Jake's guard made for the Drive2.
Is it a closeout?
Yes, it is a closeout item, so stock is limited.
Warranty
This brush guard is new and covered by our returns and refunds policy. Returns and refunds · Shipping policy