Images are for reference only. Use the spec table for part numbers.
Torque Kit for E-Z-GO Medalist and TXT 4-Cycle Gas (1991.5 to 2009)
4.8Lab rated
- Fits the E-Z-GO TXT, E-Z-GO Medalist.
- Torque kit, gas engine.
- New part.
Secure payments
Pay over time with Klarna on eligible orders. Express payment options available at checkout.
- Free shipping over $199, lower 48
- 30 day returns
- Email support
Overview
This is a Torque kit for the E-Z-GO Medalist and TXT 4-cycle gas with the twin cylinder Robins engine (1991.5 to 2009): a 28 degree driven clutch and a corrugated drive belt.
Belt slipping, jerky take-off or a cart that will not reach speed? Worn clutch sheaves, springs or weights are common causes on gas carts.
Lifted cart or bigger tires? Lower gearing gives more pull and a smoother take-off.
In the box
- 28 degree driven clutch
- Corrugated drive belt
Compatibility
Fits
2 cart setups| Cart | Years | Gas or electric | Notes |
|---|---|---|---|
| E-Z-GO TXT | 1991.5 to 2009 | Gas | Robins twin cylinder engine |
| E-Z-GO Medalist | 1991.5 to 2009 | Gas | Robins twin cylinder engine |
Does not fit
| Your cart | Get this instead |
|---|---|
| Driven clutch only? | High torque driven clutch |
Want to be 100% sure?3 quick checks at the cart
Check your model, years and engine on the serial plate or engine tag.
Compare your old part with the photos.
Unsure? Email us a photo of the part and your serial number.
Complete your install
Add what you need from here. Each item goes in your cart at its own price.
Parts that go with this one
Not needed to run it. Add only what you want.
- Drive Clutch for E-Z-GO 2-Cycle (1989 to 1994) and 4-Cycle Gas (1991 and Up)
The drive clutch for 4-cycle E-Z-GO carts, if that side is worn too.
$462.00Add to cart
Specifications
- Part number
- 6258
- Includes
- 28 degree driven clutch, corrugated drive belt
- Effect
- Lower gearing for more torque and a smoother take-off
- Condition
- New
Requirements and install notes
Turn the key off, remove the key and disconnect the battery. Let the engine cool before you start.
Turn the key off and disconnect the battery.
Remove the drive belt, then the clutch retaining bolt, and pull the old clutch with the proper puller.
Fit the new clutch, torque the bolt to the cart's service manual, refit the belt and test drive.
FAQ
Which carts does it fit?
The E-Z-GO TXT, E-Z-GO Medalist, as listed in the fit table.
Is it new?
Yes.
Drive clutch or driven clutch: what is the difference?
The drive (primary) clutch is on the engine crankshaft. The driven (secondary) clutch is on the transaxle input. Check which one is worn before you order.
Will it fit an electric cart?
No. It is a gas engine part.
Is it in stock?
The buy box shows live stock. If an item is out of stock, email us and we will tell you when it is back.
Warranty
This torque kit is new and covered by our returns and refunds policy. Returns and refunds · Shipping policy
