Navitas On-The-Fly Programmer (OTF) with Key Lock for Navitas Controllers
- Adds driver adjustable speed, regen and acceleration to a Navitas controller
- Three knobs for speed, regen and acceleration, plus a key lock to hold settings
- For Navitas controllers only, not stock OEM controllers
Express checkout options available at checkout
Not sure it fits? Send us a photo of your cart and we will check. Buying guide: A Beginner’s Guide to Golf Cart Harnesses and Programmers
- 12 months warranty
- Free ground shipping over $199, lower 48. No sales tax.
- 30 day returns
- Email support
Overview
The Navitas On-The-Fly programmer is a small dash mounted control box that lets the driver change how a Navitas controlled cart behaves without a phone or laptop. Three dials set speed, regenerative braking and acceleration while you drive, a status LED gives diagnostic feedback, and the lock and key set disables the dials so nobody else can change your settings.
It is the part to add when your Navitas kit came without one, such as the 440A TAC2 AC controller kits, or to replace a lost or damaged programmer.
Compatibility
Fits
- Navitas controllers with an OTF port (TSX 3.0 and TAC2)
- Stock controller
- Not applicable
- Voltage
- Powered by the controller
- Years
- Any
Regen adjustment applies where the controller supports it
Does not fit
- Stock OEM controllers
- Controllers from other manufacturers
Not listed here? Contact us to verify fitment before you order. support@golfcartlab.com
How to confirm it fits
Check that your cart runs a Navitas controller.
Look for the programmer port on the controller or its harness.
Contact us with your controller model if you are unsure.
What's in the box
- Navitas On-The-Fly programmer
- Lock and key set
Completes the install
Optional
Specifications
- Brand
- Navitas
- Part type
- On-The-Fly programmer
- Adjustments
- Speed, regenerative braking and acceleration
- Settings lock
- Lock and key set (dials disabled when locked)
- Driver feedback
- Status LED for diagnostic feedback
- Works with
- Navitas controllers with an OTF port
- Condition
- New
- Warranty
- 12 months from ship date
Shipping weight and box dimensions are confirmed before dispatch.
Requirements and install notes
Mount the programmer where the driver can reach it without leaning out of the seat, and route the cable away from moving parts and battery terminals.
Disconnect the battery pack before plugging the programmer into the controller.
Use the key lock to hold settings once the cart is set up.
Warranty
This part carries a 12 month warranty from the ship date, handled by us. Proof of purchase is required. Labour, damage from incorrect installation, wrong voltage and overload are not covered. See our returns and refunds policy for the full process.
Manufacturer part reference
- Manufacturer part number
- 10-000686
- GCL SKU
- 87-OTF
Reviews
There are no reviews yet.