Images are for reference only.
Brand newGenuine MadJax
MadJax Ultimate Plus LED Light Kit for E-Z-GO RXV (2008 to 2015)
4.7Lab rated
- Fits the E-Z-GO RXV, 2008 to 2015, gas or electric.
- Complete kit: LED headlights, taillights, turn signals, brake lights and horn.
- Gas and electric brake switches both in the box.
- Runs on 12 to 48 volts with the converter in the box.
- Dual USB port and a 12 volt accessory connection in the dash.
Secure payments
Pay over time with Klarna on eligible orders. Express payment options available at checkout.
- Free shipping over $199, lower 48
- 30 day returns
- Email support
Overview
This is the MadJax Ultimate Plus LED light kit for the E-Z-GO RXV, gas or electric, from 2008 to 2015. It adds LED headlights with daytime running lights, LED taillights, brake lights, turn signals, a horn and a dual USB port.
Driving at dusk or around traffic? Brake lights, turn signals and a horn let people around you see what you are about to do. The stalk sits where a car's does, so it feels natural from the first drive.
Is your RXV a 2016 or later? The body changed, so it takes its own kit. See the Does NOT fit list for the link.
Manuals and documents
Compatibility
Fits
| Cart | Years | Power | Notes |
|---|---|---|---|
| E-Z-GO RXV | 2008 to 2015 | Gas or electric | Electric and gas brake switches both in the box |
Does not fit
| Your cart | Get this instead |
|---|---|
| E-Z-GO RXV 2016 and up | Ultimate Plus kit for the RXV 2016 to 2022 |
| E-Z-GO TXT and T48 | Ultimate Plus kit for the TXT |
| E-Z-GO S4 and L4 | Email us and we will match it |
Want to be 100% sure?3 quick checks at the cart
Check that your cart is an E-Z-GO RXV from 2008 to 2015.
A 2016 or later RXV takes a different kit: see the Does NOT fit list.
Unsure? Send us a photo of your cart from the front and its serial number.
What's in the box
- LED headlights and LED taillights
- Automotive-style turn signal stalk and steering column cover
- Dual 5 volt USB charging port, 1 amp and 2.1 amp
- Hazard switch and horn
- Electric and gas brake switches
- 48 to 12 volt converter
- Wiring harness, installation hardware and templates for cut-in lights (where the cart needs them)
- Control box
Specifications
- Brand
- MadJax
- Operation
- 12 to 48 volts, voltage converter included
- Beams
- High and low beam with automotive-style daytime running lights
- Turn signals
- Self-canceling, from the turn signal stalk
- Stalk switches
- High/low beam, daytime running lights, 2-position accessory light switch (light bars, underbody lights), horn button
- Brake lights
- Mechanical brake switch with built-in brake light timer
- USB
- Dash-mounted dual 5 volt USB port, 1 amp and 2.1 amp
- Accessory output
- 7.5 amp 12 volt connection in the dash, for a radio or interior lights
- Gas or electric
- Both
- Condition
- New
- Control box
- 30 second turn signal timer, no flasher or relay needed, brake lights switch off 3 minutes after the parking brake is set
Requirements and install notes
Tools from the instructions: #2 Phillips screwdriver, rotary cutting tool, sandpaper, power drill, 15/32 in drill bit.
Turn the key off and set the RUN/TOW switch to TOW. The batteries can stay in, but disconnect the main negative.
On a body without pre-cut light holes, trace the headlight and taillight templates and cut inside the line.
Route the harness, mount the hazard switch and the 1-1/8 in USB port in the dash, then the stalk and the horn.
Fit the brake switch for your cart: the kit has an electric and a gas brake switch, and the instructions cover both.
Fit the voltage converter: Fit the voltage converter on every cart, gas or electric: red wire with the fuse to the main positive of the pack, black to the main negative, mounted flat under the seat (metal is best). On a gas cart it stops starter generator voltage spikes from damaging the lights.
The maker recommends professional installation. Take your time if you fit it yourself.
FAQ
Does it work on a 48 volt cart?
Yes. The kit runs on 12 to 48 volts through the voltage converter in the box, on gas and electric carts.
What does the kit add besides headlights?
LED taillights, brake lights, self-canceling turn signals, a horn, a hazard switch, a dual USB port and a 7.5 amp 12 volt accessory connection in the dash.
Do I have to cut the body?
Only on a body without pre-cut light holes. The supplied templates show where to cut.
Does it fit a gas RXV?
Yes. The box has both an electric and a gas brake switch, and the instructions cover both carts.
Does a light kit make my RXV street legal?
Lights, signals and brake lights are part of what most local rules ask for, but the rules differ by state and town. Check yours before you drive on the road.
Warranty
This LED light kit is new and covered by our returns and refunds policy. Returns and refunds · Shipping policy