Images are for reference only.
Brand newGenuine MadJax
MadJax LUX RGB LED Light Kit for Yamaha Drive2 (2017 and Up)
4.6Lab rated
- Fits the Yamaha Drive2, 2017 and up, gas or electric.
- RGB daytime running lights set from your phone over Bluetooth.
- Complete kit: taillights, sequential signals, brake lights and horn.
- Runs on 12 to 48 volts with the converter in the box.
- Dual USB port and a 12 volt accessory connection in the dash.
Secure payments
Pay over time with Klarna on eligible orders. Express payment options available at checkout.
- Free shipping over $199, lower 48
- 30 day returns
- Email support
Overview
This is the MadJax LUX RGB LED light kit for the Yamaha Drive2, gas or electric, from 2017 on. It adds LED headlights with RGB daytime running lights you control from your phone over Bluetooth, plus LED taillights, brake lights, sequential front turn signals, a horn and a dual USB port.
Want lights that match your cart? With RGB3 you set the colour, the pattern and the speed of the daytime running lights in the app, and change them whenever you like.
Driving at dusk or around traffic? Brake lights, turn signals and a horn let people around you see what you are about to do. The stalk sits where a car's does, so it feels natural from the first drive.
Manuals and documents
Compatibility
Fits
| Cart | Years | Power | Notes |
|---|---|---|---|
| Yamaha Drive2 | 2017 and up | Gas or electric | Factory body |
Does not fit
| Your cart | Get this instead |
|---|---|
| Yamaha G29 Drive (2007 to 2016) | Ultimate Plus kit for the G29 Drive |
| Prefer white daytime running lights on the Drive2? | Ultimate Plus kit for the Drive2 |
| Yamaha G14 to G22 | Email us and we will match it |
Want to be 100% sure?3 quick checks at the cart
Check that your cart is a Yamaha Drive2 from 2017 on.
An older G29 Drive takes a different kit: see the Does NOT fit list.
Unsure? Send us a photo of your cart from the front and its serial number.
What's in the box
- LED headlights and LED taillights
- Automotive-style turn signal stalk and steering column cover
- Dual 5 volt USB charging port, 1 amp and 2.1 amp
- Hazard switch and horn
- Brake switch
- 48 to 12 volt converter
- Wiring harness, installation hardware and templates for cut-in lights (where the cart needs them)
- Control box
- RGB light module
Specifications
- Brand
- MadJax
- Operation
- 12 to 48 volts, voltage converter included
- Beams
- High and low beam with automotive-style daytime running lights
- Daytime running lights
- RGB3, colour, pattern and speed set in the phone app over Bluetooth
- Turn signals
- Sequential front signals, self-canceling
- Stalk switches
- High/low beam, daytime running lights, 2-position accessory light switch (light bars, underbody lights), horn button
- Brake lights
- Mechanical brake switch with built-in brake light timer
- USB
- Dash-mounted dual 5 volt USB port, 1 amp and 2.1 amp
- Accessory output
- 7.5 amp 12 volt connection in the dash, for a radio or interior lights
- Gas or electric
- Both
- Condition
- New
- Control box
- 30 second turn signal timer, no flasher or relay needed, brake lights switch off 3 minutes after the parking brake is set
Requirements and install notes
Tools from the instructions: Phillips screwdriver, flat head screwdriver, 8 mm socket, power drill, cutting tool, sandpaper.
Turn the key off and set the RUN/TOW switch to TOW. The batteries can stay in, but disconnect the main negative.
Take off the cowl, swap in the LED headlights and taillights, and route the plug and play harness. On a cart without pre-cut light holes, the supplied templates show where to cut.
Fit the hazard rocker switch and the 1-1/8 in USB port in the dash, then the brake switch (two mounting options in the instructions), the stalk and the horn.
Fit the voltage converter: Fit the voltage converter on every cart, gas or electric: red wire with the fuse to the main positive of the pack, black to the main negative, mounted flat under the seat (metal is best). On a gas cart it stops starter generator voltage spikes from damaging the lights.
Plug in the RGB module and pair it with the light app on your phone.
The maker recommends professional installation. Take your time if you fit it yourself.
FAQ
Does it work on a 48 volt cart?
Yes. The kit runs on 12 to 48 volts through the voltage converter in the box, on gas and electric carts.
What does the kit add besides headlights?
LED taillights, brake lights, self-canceling turn signals, a horn, a hazard switch, a dual USB port and a 7.5 amp 12 volt accessory connection in the dash.
Do I have to cut the body?
Only on a cart without pre-cut light holes. The supplied templates show where to cut. The USB port needs a 1-1/8 in hole in the dash.
How do I change the light colour?
Download the light app on your phone and pair it with the RGB module over Bluetooth. You set the colour, the pattern and the speed of the daytime running lights there.
Does a light kit make my Drive2 street legal?
Lights, signals and brake lights are part of what most local rules ask for, but the rules differ by state and town. Check yours before you drive on the road.
Warranty
This LED light kit is new and covered by our returns and refunds policy. Returns and refunds · Shipping policy
