Brand newGenuine Jake's
Jake's Front Disc Brake Kit for E-Z-GO Express with Factory Lift and 4-Bolt Steering
4.9Lab rated
- Fits the E-Z-GO Express with factory lift, 4-bolt steering.
- Hydraulic front disc brakes.
- Needs 10 in+ straight bell wheels.
- Fill and bleed before use.
Secure payments
Pay over time with Klarna on eligible orders. Express payment options available at checkout.
- Free shipping over $199, lower 48
- 30 day returns
- Email support
Overview
These are Jake's hydraulic front disc brakes for the E-Z-GO Express with the factory lift and the newer 4-bolt steering. It is a front-wheel hydraulic system for speed modified carts. Jake's says they raise stopping power about three times over stock.
Faster motor, lifted cart or street use? More speed needs more stopping power: front discs are the upgrade Jake's supplies to makers of street legal carts.
Before you order: Your cart needs wheels of at least 10 inches with a straight bell on the back side. The system arrives dry: fill and bleed it before you drive.
Compatibility
Fits
| Cart | Years | Gas or electric | Notes |
|---|---|---|---|
| E-Z-GO Express | 2001.5 and up | Gas or electric | Factory lift, 4-bolt steering |
Does not fit
| Your cart | Get this instead |
|---|---|
| Express with the older steering | Email us and we will match it |
| E-Z-GO TXT and Medalist | Jake's brake kit for the TXT and Medalist |
Want to be 100% sure?2 quick checks at the cart
Check your Express has the factory lift and the 4-bolt steering.
Check your wheels: 10 inches or more, straight bell.
What's in the box
- Brake rotors (2) with wheel studs and rotor bolts
- Calipers and caliper brackets
- Master cylinder with reservoir, bracket and clevis pin
- Brake lines and hardware
- Jake's spindles where the kit needs them
Specifications
- Part number
- 7295
- Brand
- Jake's
- Type
- Hydraulic front disc brakes
- Stopping power
- About 3 times stock, per Jake's
- Wheels needed
- 10 in or larger, straight bell
- Lift
- Factory lift
- Rear brakes
- Unchanged
- Condition
- New
Requirements and install notes
Lift the cart onto jack stands and remove the front wheels, tires and stock hubs.
Fit the Jake's spindles in the kit with the stock hardware (they are side specific).
Bolt the wheel studs to the rotors and refit the rotor assemblies; the studs seat fully when the wheel is drawn on with an impact.
Mount the calipers, the master cylinder and its bracket at the brake pedal, and run the lines.
The system is NOT pre-filled or pre-bled with brake fluid. Fill and bleed it before you drive, as the instructions explain. Failure to do so may cause poor braking or system failure.
Jake's recommends a qualified mechanic install this system.
FAQ
Does it come with brake fluid?
No. The system is not pre-filled or pre-bled. Fill and bleed it before use, as the instructions explain.
What wheels do I need?
Wheels of at least 10 inches with a straight bell on the back side. Email us a photo of the back of your wheel if you are not sure.
Does it change my rear brakes?
No. It is a hydraulic system for the front wheels only and does not affect the rear or parking brake.
Which steering does it need?
The newer style 4-bolt steering, on an Express with the factory lift.
Is it made in the USA?
Yes, Jake's makes it in the U.S.A.
Warranty
This brake kit is new and covered by our returns and refunds policy. Returns and refunds · Shipping policy