Brand newGenuine Jake's
Jake's Front Disc Brake Kit for Club Car Precedent (Mid 2008 and Up)
4.6Lab rated
- Fits the Club Car Precedent, mid 2008 and up. Pick your lift.
- Hydraulic front disc brakes.
- About 3x the stopping power.
- Needs 10 in+ straight bell wheels.
- Fill and bleed before use.
Secure payments
Pay over time with Klarna on eligible orders. Express payment options available at checkout.
- Free shipping over $199, lower 48
- 30 day returns
- Email support
Overview
These are Jake's hydraulic front disc brakes for the Club Car Precedent from mid 2008 on. Pick the version for your cart: non-lifted, Jake's 2008 spindle lift, or Jake's 2008 and up long travel. Jake's says they raise stopping power about three times over stock.
Faster motor, lifted cart or street use? More speed needs more stopping power: front discs are the upgrade Jake's supplies to makers of street legal carts.
Before you order: Your cart needs wheels of at least 10 inches with a straight bell on the back side. The system arrives dry: fill and bleed it before you drive.
Manuals and documents
Compatibility
Fits
| Cart | Years | Gas or electric | Notes |
|---|---|---|---|
| Club Car Precedent | Mid 2008 and up | Gas or electric | Raised lugs; version by lift |
Does not fit
| Your cart | Get this instead |
|---|---|
| Precedent 2004 to mid 2008 on a Jake's spindle lift | Jake's brake kit for the 2004 to 2008 Precedent |
| Club Car DS | Jake's brake kit for the lifted DS |
| Lifts that are not Jake's designs | Email us and we will match it |
Want to be 100% sure?3 quick checks at the cart
Check your Precedent is from mid 2008 on (raised lugs).
Check your lift: none, Jake's 2008 spindle lift, or Jake's long travel. Unsure? Email us a photo.
Check your wheels: 10 inches or more, straight bell.
What's in the box
- Brake rotors (2) with wheel studs and rotor bolts
- Calipers and caliper brackets
- Master cylinder with reservoir, bracket and clevis pin
- Brake lines and hardware
- Jake's spindles where the kit needs them
Specifications
Compare options
| Specification | Non-lifted | Jake's 2008 spindle lift | Jake's 2008 and up long travel |
|---|---|---|---|
| Part number | 7059 | 7297 | 7290 |
| Lift | None | Jake's 2008 spindle lift only | Jake's 2008 and up long travel only |
- Brand
- Jake's
- Type
- Hydraulic front disc brakes
- Stopping power
- About 3 times stock, per Jake's
- Wheels needed
- 10 in or larger, straight bell
- Rear brakes
- Unchanged
- Condition
- New
Requirements and install notes
Lift the cart onto jack stands and remove the front wheels, tires and stock hubs.
Fit the Jake's spindles in the kit with the stock hardware (they are side specific).
Bolt the wheel studs to the rotors and refit the rotor assemblies; the studs seat fully when the wheel is drawn on with an impact.
Mount the calipers, the master cylinder and its bracket at the brake pedal, and run the lines.
The system is NOT pre-filled or pre-bled with brake fluid. Fill and bleed it before you drive, as the instructions explain. Failure to do so may cause poor braking or system failure.
Jake's recommends a qualified mechanic install this system.
FAQ
Does it come with brake fluid?
No. The system is not pre-filled or pre-bled. Fill and bleed it before use, as the instructions explain.
What wheels do I need?
Wheels of at least 10 inches with a straight bell on the back side. Email us a photo of the back of your wheel if you are not sure.
Does it change my rear brakes?
No. It is a hydraulic system for the front wheels only and does not affect the rear or parking brake.
Which version do I need?
Non-lifted carts take the non-lifted kit. Lifted carts must have Jake's 2008 spindle lift or Jake's 2008 and up long travel, and take the matching kit.
Is it made in the USA?
Yes, Jake's makes it in the U.S.A.
Warranty
This brake kit is new and covered by our returns and refunds policy. Returns and refunds · Shipping policy
Manufacturer part reference
- GCL SKU
- GCL-JAKES-FRONT-DISC-BRAKE-KIT-CLUB-CAR-PRECEDENT-2008-UP