Images are for reference only.
Brand newGenuine Jake's
Jake's Winch Mount Front Bumper for Yamaha G29 Drive (2007 to 2016)
4.6Lab rated
- Fits the Yamaha G29 Drive, 2007 to 2016.
- Pre-drilled for most 2000 lb ATV-style winches.
- Light mounting tab.
- Not for long travel lifts.
Secure payments
Pay over time with Klarna on eligible orders. Express payment options available at checkout.
- Free shipping over $199, lower 48
- 30 day returns
- Email support
Overview
This is a Jake's winch mount front bumper for the Yamaha G29 Drive from 2007 to 2016, gas or electric. It has pre-drilled holes for most 2000 lb ATV-style winches and a tab for off-road lights.
Need to pull a cart or a load out of the mud? Bolt a 2000 lb ATV-style winch to the bumper and you have recovery power on the front.
Lifted cart? It fits non-lifted carts and lifted carts, except carts with long travel kits.
In the box
- Jake's winch mount front bumper, black
The winch and the lights shown in the photos are not included.
Compatibility
Fits
| Cart | Years | Gas or electric | Notes |
|---|---|---|---|
| Yamaha G29 Drive | 2007 to 2016 | Gas or electric | Stock height or lifted, not long travel |
Does not fit
| Your cart | Get this instead |
|---|---|
| Any cart with a long travel lift kit | |
| Yamaha Drive2 | Jake's brush guard for the Drive2 |
Want to be 100% sure?3 quick checks at the cart
Check that your cart is a Yamaha G29 Drive from 2007 to 2016.
Check that it does not have a long travel lift kit.
Unsure? Send us a photo of the front of your cart and its serial number.
Specifications
- Brand
- Jake's
- Finish
- High-gloss black powder coat
- Winch mount
- Pre-drilled for most 2000 lb ATV-style winches
- Light tab
- Yes
- Made in
- U.S.A.
- Condition
- New, closeout
Requirements and install notes
Set the cart on level ground with the key off.
Bolt the bumper to the front of the frame at the factory points, hand tight, then tighten.
Bolt your winch to the pre-drilled holes and wire it per the winch maker's instructions.
FAQ
Is the winch included?
No. The bumper is pre-drilled for most 2000 lb ATV-style winches, sold separately.
Does it fit a lifted cart?
Yes, except carts with long travel lift kits.
Can I mount lights on it?
Yes, it has a light mounting tab. The lights in the photos are not included.
Winch bumper or brush guard: which do I need?
A brush guard protects the front. The winch bumper also gives you a mount for a winch to pull loads or get unstuck.
Is it made in the USA?
Yes.
Warranty
This winch mount bumper is new and covered by our returns and refunds policy. Returns and refunds · Shipping policy