Brand newGenuine 10L0L
E-Z-GO TXT PDS 36V Replacement Motor, Sepex, 2000 and Later
4.9Lab rated
- Fits E-Z-GO TXT 36V PDS carts, 2000 and later.
- Bolts straight in. Same mount as the stock PDS motor.
- Keeps regen braking working with the PDS controller.
- Same wiring. A1, A2, F1, F2 terminals, like stock.
- Rated 36V, 3.0 kW, 2,600 rpm. Motor only.
Secure payments
Pay over time with Klarna on eligible orders. Express payment options available at checkout.
- 12 months warranty
- Free shipping on orders of $80+, lower 48
- 30 day returns
- Email support
Overview
This is an aftermarket replacement for the factory motor in the E-Z-GO TXT with PDS (Precision Drive System) drive, the 36V separately excited system built from 2000 on. It replaces OEM parts 73445-G02 and 73124-G08 and is not made by E-Z-GO. It bolts to the original rear end and runs on the original PDS controller.
Is your cart a PDS? A PDS TXT has a Run/Tow switch under the seat and a PDS controller, part 73326-G02 to G07. If yours has neither, it is a DCS or series cart and needs a different motor.
Is your motor worn out? Loss of power on hills, a whining bearing, a burning smell or a cart that cuts out when hot are the usual signs. Test it first, since a weak pack or a failed solenoid can look the same.
Want more speed or hill power instead? That takes a different motor. On a PDS cart from 2000 to 2009, the AMD 36V speed motor works with the stock controller and needs the speed sensor adapter harness, part 3228. To go AC, the Eco Battery kit for the TXT and Medalist replaces the motor and the controller together.
- Voltage
- 36V
In the box
- One 36V separately excited replacement motor
Motor only. Your cables, mounting bolts and PDS controller are reused.
Compatibility
Fits
| Cart | Years | Notes |
|---|---|---|
| E-Z-GO TXT, 36V electric with PDS drive | 2000 and later | PDS controller 73326-G02 to G07 and a Run/Tow switch |
Does not fit
| Your cart |
|---|
| E-Z-GO TXT with DCS drive or a series motor |
| E-Z-GO TXT 48V |
| E-Z-GO RXV (factory AC drive) |
| Carts without a Run/Tow switch |
Not sure whether your TXT is a PDS? Send us a photo of the controller label or the motor label and we will check it.
Want to be 100% sure?3 quick checks at the cart
Read the label on your old motor. This motor replaces 73445-G02 and 73124-G08.
Check for a Run/Tow switch under the seat and a PDS controller (73326-G02 to G07). Both must be there.
Find the year from the serial number with our E-Z-GO serial number lookup. This motor covers 2000 and later.
Specifications
- Brand
- 10L0L
- SKU / MPN
- ELE-Y230-A
- Type
- Aftermarket replacement motor (not made by E-Z-GO)
- Replaces OEM
- 73445-G02, 73124-G08
- Fits
- E-Z-GO TXT 36V with PDS drive, 2000 and later
- Needs
- PDS controller 73326-G02 to G07 and a Run/Tow switch
- Motor type
- DC, separately excited (A1, A2, F1, F2 terminals)
- Voltage
- 36V
- Rated output
- 3.0 kW
- Rated speed
- 2,600 rpm
- Field current
- 10 A
- Armature current
- 110 A
- Duty rating
- S2, 30 minutes
- Insulation
- Class H
- Size
- 8.54 in. body length, 6.69 in. diameter
- Motor model
- ZQS36-3.0C-T
- Shipping weight
- 46.7 lb (21.2 kg)
- Warranty
- 1 year (12 months)
- Condition
- New
Requirements and install notes
Park on level ground, set the Run/Tow switch to Tow, chock the wheels and disconnect the main negative cable from the battery pack.
Photograph the motor wiring, then label each cable by its terminal (A1, A2, F1, F2) before you take it off. The new motor carries the same four terminals.
Unplug the speed sensor wires at the motor end, then remove the bolts that hold the motor to the rear end. The steps photo shows the order.
Support the motor as it comes free: it is heavy. Clean the axle input splines and grease them lightly before you slide the new motor on.
Refit the cables to the same letters and tighten the terminal nuts firmly without spinning the studs, then reconnect the pack, set Run and test at low speed in an open space.
FAQ
Which carts does this motor fit?
36V E-Z-GO TXT carts with PDS drive, built from 2000 on, with a Run/Tow switch and a PDS controller (73326-G02 to G07). It does not fit a DCS or series TXT, a 48V TXT or an RXV.
Is this a genuine E-Z-GO motor?
No. It is an aftermarket replacement made for 10L0L to the stock PDS rating: 36V, 3.0 kW, separately excited. It is not made by E-Z-GO.
How do I tell PDS from DCS?
Both are 36V. A PDS cart has a Run/Tow switch under the seat and a motor with four terminals (A1, A2, F1, F2). A DCS cart has no Run/Tow switch. If you are unsure, send us a photo of the controller label.
Can I fit it myself?
Yes, with hand tools and a helper to take the weight. Set Run/Tow to Tow first, label the four cables, grease the splines, and reconnect each cable to the same terminal.
Warranty
10L0L backs this motor with a 1-year warranty. Returns and refunds · Shipping policy