Images are for reference only. Use the spec table for part numbers.
Replacement Black Front Seat Bottom Cushion Assembly for E-Z-GO L6, S6 and Shuttle (2015 and Up)
4.6Lab rated
- Fits the E-Z-GO Shuttle, L6 and S6 from 2015 on.
- Front seat bottom.
- Black, factory welt pattern.
- Reuses your hardware and hip restraints.
- About 41.56 x 17.31 in.
Secure payments
Pay over time with Klarna on eligible orders. Express payment options available at checkout.
- Free shipping over $199, lower 48
- 30 day returns
- Email support
Overview
This is a Black replacement front seat bottom cushion assembly for the E-Z-GO Shuttle, L6 and S6 from 2015 on, gas or electric, with a colour match and factory welt pattern.
Seat torn, cracked or gone flat? Sun and weather wear out seat vinyl over time. Move the hardware and hip restraints from the old cushion to the new one and the seat goes back on.
Running a fleet of six seat carts? Front seats get the most use, so this is often the first cushion to go.
In the box
- One Black front seat bottom cushion assembly
Reuse the hardware and hip restraints from your old cushion.
Compatibility
Fits
3 cart setups| Cart | Years | Gas or electric | Colours |
|---|---|---|---|
| E-Z-GO Shuttle (front seat) | 2015 and up | Gas or electric | Black |
| E-Z-GO L6 (front seat) | 2015 and up | Gas or electric | Black |
| E-Z-GO S6 (front seat) | 2015 and up | Gas or electric | Black |
Does not fit
| Your cart | Get this instead |
|---|---|
| E-Z-GO TXT and T48, 2014 and up | Seat bottom for E-Z-GO TXT and T48 |
| E-Z-GO RXV, 2016 and up | Seat bottom for E-Z-GO RXV, 2016 and up |
Want to be 100% sure?3 quick checks at the cart
Check that your cart is an E-Z-GO Shuttle, L6 or S6 from 2015 on.
Measure the old front cushion: about 41.56 x 17.31 inches.
Unsure? Send us a photo of your cart from the side and its serial number.
Specifications
- Part number
- 18-225
- Type
- Front seat bottom cushion assembly
- Colour
- Black, factory welt pattern
- Size
- About 41.56 x 17.31 in
- Condition
- New
Requirements and install notes
Take the old seat bottom off the cart and turn it over on a clean surface.
Take a photo of the underside first, so every bracket and hinge goes back in the same place.
Move the hardware and hip restraints from the old cushion to the same holes on the new one.
Refit the seat and check that it sits firm and does not rock before you drive.
FAQ
Which carts does it fit?
The front seat of the E-Z-GO Shuttle, L6 and S6 from 2015 on, gas or electric.
What size is it?
About 41.56 x 17.31 inches.
Does it come with hardware?
No. Remove the hardware and hip restraints from your old cushion and fit them to the new one.
Does it fit a four seat TXT?
No. The TXT and T48 have their own seat bottom, which we list separately.
Full assembly or just a seat cover?
This is the full assembly, ready to fit. A cover only replaces the vinyl over your old foam and base, so flat foam stays flat.
Warranty
This seat bottom cushion assembly is new and covered by our returns and refunds policy. Returns and refunds · Shipping policy