Replacement Stone Seat Bottom Cushion Assembly for Yamaha G29 Drive (2007 to 2016)
4.6Lab rated
- Fits the Yamaha G29 Drive, 2007 to 2016.
- Gas or electric.
- OEM Stone with the factory welt pattern.
- Complete assembly: reuse your hardware.
- About 41.5 x 20 in.
Secure payments
Pay over time with Klarna on eligible orders. Express payment options available at checkout.
- Free shipping over $199, lower 48
- 30 day returns
- Email support
Overview
This is a Stone replacement seat bottom cushion assembly for the Yamaha G29 Drive from 2007 to 2016, gas or electric, designed to meet or exceed the original equipment specifications, with an OEM colour match and factory welt pattern.
Seat torn, cracked or gone flat? Sun and weather wear out seat vinyl over time. Take the hardware off the old cushion, fit it to the new one and the seat goes back on.
Freshening up a used or rental cart? A new cushion in the factory colour is one of the quickest ways to make a tired cart look cared for.
Doing the whole seat? Our seat back for the G29 Drive comes in matching Stone.
In the box
- One Stone seat bottom cushion assembly
Hardware is reused from your old cushion.
Compatibility
Fits
| Cart | Years | Gas or electric | Colours |
|---|---|---|---|
| Yamaha G29 Drive | 2007 to 2016 | Gas or electric | Stone |
Does not fit
| Your cart | Get this instead |
|---|---|
| Yamaha Drive2 | Email us and we will match it |
| Yamaha G16 to G22 | Seat bottom for Yamaha G16 to G22 |
Want to be 100% sure?3 quick checks at the cart
Check that your cart is a Yamaha G29 Drive from 2007 to 2016.
Match the factory number on the old cushion, or measure it: about 41.5 x 20 inches.
Unsure? Send us a photo of your cart from the side and its serial number.
Complete your install
Add what you need from here. Each item goes in your cart at its own price.
Extras for this install
Not needed to run it. Add only what you want.
- Replacement Seat Back Cushion Assembly for Yamaha G29 Drive and Drive2
The matching seat back. Pick Stone to match this seat bottom.
From $393.00Choose options
Specifications
- Part number
- 14344
- Type
- Seat bottom cushion assembly
- Colour
- Stone, OEM colour match and welt pattern
- Size
- About 41.5 x 20 in
- Replaces
- Yamaha JW1-K8401-00-00, -10-00, -11-00, -12-00, -13-00
- Condition
- New
Requirements and install notes
Take the old seat bottom off the cart and turn it over on a clean surface.
Take a photo of the underside first, so every bracket and hinge goes back in the same place.
Unbolt the hardware from the old cushion and fit it to the same holes on the new one.
Refit the seat and check that it sits firm and does not rock before you drive.
FAQ
Which carts does it fit?
The Yamaha G29 Drive from 2007 to 2016, gas or electric.
What does it replace?
Yamaha JW1-K8401-00-00, JW1-K8401-10-00, JW1-K8401-11-00, JW1-K8401-12-00 and JW1-K8401-13-00.
Does it fit a Yamaha Drive2?
No. It is listed for the G29 Drive only. Email us with your cart year and we will match it.
Does it come with hardware?
No. Remove the hardware from your old cushion and fit it to the new one.
Full assembly or just a seat cover?
This is the full assembly, ready to fit. A cover only replaces the vinyl over your old foam and base, so flat foam stays flat.
Warranty
This seat bottom cushion assembly is new and covered by our returns and refunds policy. Returns and refunds · Shipping policy
