Black Friday Sale is on. Shop now

Brand newGenuine MadJax

MadJax Kinect 12.3 Inch Touchscreen Display Kit for Yamaha Drive2 with Factory Lithium (2017 and Up)

4.6Lab rated

$849.95
  • Fits the electric Yamaha Drive2, 2017 and up, with factory lithium.
  • 12.3 inch HD touchscreen that mounts in the cupholder area.
  • Complete kit: screen, hub, Drive2 adapter and lithium harnesses.
  • IP65 weather resistant.
  • WiFi and Bluetooth 5.0, with a built-in radio.

Secure payments

  • Visa
  • Mastercard
  • American Express
  • Discover
  • JCB
  • Apple Pay
  • Google Pay
  • Link
  • Klarna
  • Cash App Pay

Pay over time with Klarna on eligible orders. Express payment options available at checkout.

Brand MadJax SKU 25-371

Overview

This is the MadJax Kinect 12.3 inch touchscreen kit for the electric Yamaha Drive2 from 2017 on with the factory lithium battery and AC motor. It takes the place of the cupholder insert and shows speed, drive mode and battery level, and it brings your music, calls and navigation apps from your phone onto the screen.

Is your Drive2 the right setup? This kit carries the harnesses for the Yamaha factory lithium battery and factory controller. It is not listed for a Drive2 on lead-acid batteries or aftermarket lithium.

Want better sound with it? The display has a built-in radio and multi-channel outputs for external speakers and amplifiers. It connects to the MadJax Decibel soundbar we list: wired from the front RCA outputs to the soundbar AUX input, or wireless with a Bluetooth transmitter or by pairing your phone to both.

Compatibility

Fits

CartYearsPowerBattery
Yamaha Drive22017 and upElectric, AC motorFactory lithium

Does not fit

Your cartGet this instead
Drive2 with lead-acid or aftermarket lithium batteriesEmail us and we will match it
Yamaha G29 DriveEmail us and we will match it
Club Car Precedent, Tempo and OnwardKinect kit for Club Car
E-Z-GO RXVKinect kit for the E-Z-GO RXV
72 volt carts
Carts with an aftermarket dash
Want to be 100% sure?4 quick checks at the cart
  1. Check that your cart is an electric Drive2 from 2017 or newer.

  2. Check that it has the factory Yamaha lithium battery and the factory controller.

  3. Check that the factory dash is still on the cart.

  4. Unsure? Send us a photo of your cart from the side and its serial number.

What's in the box

  • Kinect 12.3 inch display screen
  • Kinect hub, display wire harness and hub CAN breakout wire harness (part 25-300)
  • Yamaha Drive2 dash adapter (part 25-314)
  • Yamaha Drive2 lithium CAN wire harness kit (part 25-343)

Specifications

Part number
25-371
Brand
MadJax
Screen
12.3 in widescreen LCD touchscreen, 1920 x 720
Shows
Speed, drive mode, battery level, power output and trip odometer. What shows depends on the cart
Connectivity
WiFi 2.4 and 5 GHz, Bluetooth 5.0
Audio
Built-in radio, multi-channel outputs for external speakers and amplifiers
Weather rating
IP65
Updates
Over the air, from a WiFi hotspot
Pack voltage
48 V only, not for 72 V systems
Condition
New

Requirements and install notes

  1. Tools from the instructions: 5 mm Allen wrench or socket, 12 mm socket and wrench, Phillips screwdriver, flathead or trim tool, wire crimpers and strippers.

  2. Key off, parking brake on, seat bottom off, RUN/TOW switch to TOW. Turn the battery off and disconnect all leads from the negative terminal.

  3. Take out the Yamaha cupholder insert and fit the battery harness at the state of charge meter.

  4. Run the display harness from the dash to the battery tray under the cart, along the main harness. Stick the hub under the seat with the supplied tape.

  5. Take off the motor cover to connect the power wire at the controller. A rear seat kit has to come off first.

  6. Plug the CAN harness into the diagnostic port near the RUN/TOW switch, fit the display to the adapter and press it into the cupholder area. Connect the hub to the battery. Power on the cart, peel off the screen protector, check for a software update over WiFi, and choose your cart model in the settings menu. The instructions show each step.

FAQ

Which option do I pick?

There is one version. It is for the Drive2 from 2017 on with the factory lithium battery and AC motor.

Does it work on a 72 volt cart?

No. Kinect is built for 48 volt carts and is not compatible with 72 volt systems.

Will it work with an aftermarket dash?

No. Kinect works with factory dashes only, so an aftermarket dash has to come off first.

What does the screen show?

Speed, drive mode, battery level, power output and trip odometer. Exactly what shows depends on the cart. It also runs music, contacts and navigation apps from your phone over WiFi and Bluetooth 5.0.

Can I connect speakers or a soundbar?

Yes. It has a built-in radio and multi-channel outputs for external speakers and amplifiers. It connects to the Decibel soundbar wired, RCA to AUX with a ground loop isolator, or wireless through a Bluetooth transmitter or your phone.

Warranty

This Kinect display kit is new and covered by our returns and refunds policy. Returns and refunds · Shipping policy

Other options for your Yamaha Drive2

See all Yamaha Dash, Audio and Interior