Images are for reference only.
Brand newGenuine MadJax
MadJax Ultimate Plus LED Light Kit for E-Z-GO TXT and T48 (2014 and Up)
4.6Lab rated
- Fits the E-Z-GO TXT and T48, 2014 and up, gas or electric.
- Complete kit: LED headlights, taillights, turn signals, brake lights and horn.
- Control box with turn signal timer, no flasher needed.
- Runs on 12 to 48 volts with the converter in the box.
- Dual USB port and a 12 volt accessory connection in the dash.
Secure payments
Pay over time with Klarna on eligible orders. Express payment options available at checkout.
- Free shipping over $199, lower 48
- 30 day returns
- Email support
Overview
This is the MadJax Ultimate Plus LED light kit for the E-Z-GO TXT and Freedom T48, gas or electric, from 2014 on. It adds LED headlights with daytime running lights, LED taillights, brake lights, turn signals, a horn and a dual USB port.
Driving at dusk or around traffic? Brake lights, turn signals and a horn let people around you see what you are about to do. The stalk sits where a car's does, so it feels natural from the first drive.
Is your TXT older than 2014? The front changed in 2014, so check the year on your serial plate before you order.
Manuals and documents
Compatibility
Fits
2 cart setups| Cart | Years | Power | Notes |
|---|---|---|---|
| E-Z-GO TXT | 2014 and up | Gas or electric | Factory body |
| E-Z-GO Freedom T48 | 2014 and up | Electric | Factory body |
Does not fit
| Your cart | Get this instead |
|---|---|
| E-Z-GO TXT before 2014 | Email us and we will match it |
| E-Z-GO RXV | Ultimate Plus kit for the RXV |
| E-Z-GO S4 and L4 | Email us and we will match it |
Want to be 100% sure?3 quick checks at the cart
Check that your cart is an E-Z-GO TXT or Freedom T48 from 2014 on.
An RXV takes a different kit: see the Does NOT fit list.
Unsure? Send us a photo of your cart from the front and its serial number.
What's in the box
- LED headlights and LED taillights
- Automotive-style turn signal stalk and steering column cover
- Dual 5 volt USB charging port, 1 amp and 2.1 amp
- Hazard switch and horn
- Brake switch
- 48 to 12 volt converter
- Wiring harness, installation hardware and templates for cut-in lights (where the cart needs them)
- Control box
Specifications
- Brand
- MadJax
- Operation
- 12 to 48 volts, voltage converter included
- Beams
- High and low beam with automotive-style daytime running lights
- Turn signals
- Self-canceling, from the turn signal stalk
- Stalk switches
- High/low beam, daytime running lights, 2-position accessory light switch (light bars, underbody lights), horn button
- Brake lights
- Mechanical brake switch with built-in brake light timer
- USB
- Dash-mounted dual 5 volt USB port, 1 amp and 2.1 amp
- Accessory output
- 7.5 amp 12 volt connection in the dash, for a radio or interior lights
- Gas or electric
- Both
- Condition
- New
- Control box
- 30 second turn signal timer, no flasher or relay needed, brake lights switch off 3 minutes after the parking brake is set
Requirements and install notes
Tools from the instructions: Phillips screwdriver, power drill, 15/32 in drill bit, cutting tool, sandpaper.
Turn the key off and set the RUN/TOW switch to TOW. The batteries can stay in, but disconnect the main negative.
On a body without pre-cut light holes, trace the headlight and taillight templates and cut inside the line.
Route the harness, mount the hazard switch and the 1-1/8 in USB port in the dash, then the brake switch, stalk and horn.
Fit the voltage converter: Fit the voltage converter on every cart, gas or electric: red wire with the fuse to the main positive of the pack, black to the main negative, mounted flat under the seat (metal is best). On a gas cart it stops starter generator voltage spikes from damaging the lights.
The maker recommends professional installation. Take your time if you fit it yourself.
FAQ
Does it work on a 48 volt cart?
Yes. The kit runs on 12 to 48 volts through the voltage converter in the box, on gas and electric carts.
What does the kit add besides headlights?
LED taillights, brake lights, self-canceling turn signals, a horn, a hazard switch, a dual USB port and a 7.5 amp 12 volt accessory connection in the dash.
Do I have to cut the body?
Only on a body without pre-cut light holes. The supplied templates show where to cut.
Does it fit a TXT older than 2014?
This kit is listed for the TXT and T48 from 2014 on. For an older TXT, email us the serial number and we will check.
Does a light kit make my TXT street legal?
Lights, signals and brake lights are part of what most local rules ask for, but the rules differ by state and town. Check yours before you drive on the road.
Warranty
This LED light kit is new and covered by our returns and refunds policy. Returns and refunds · Shipping policy