Black Friday Sale is on. Shop now

Brand newGenuine MadJax

MadJax Ultimate Plus LED Light Kit for Yamaha G29 Drive (2007 to 2016)

4.6Lab rated

$592.00
  • Fits the Yamaha G29 Drive, 2007 to 2016, gas or electric.
  • Complete kit: LED headlights, taillights, turn signals, brake lights and horn.
  • Control box with turn signal timer, no flasher needed.
  • Runs on 12 to 48 volts with the converter in the box.
  • Dual USB port and a 12 volt accessory connection in the dash.

Out of stock

Brand MadJax SKU 02-049

Overview

This is the MadJax Ultimate Plus LED light kit for the Yamaha G29 Drive, gas or electric, from 2007 to 2016. It adds LED headlights with daytime running lights, LED taillights, brake lights, turn signals, a horn and a dual USB port.

Driving at dusk or around traffic? Brake lights, turn signals and a horn let people around you see what you are about to do. The stalk sits where a car's does, so it feels natural from the first drive.

Is your Drive a 2017 or later? That is the Drive2, which takes its own kit. See the Does NOT fit list for the link.

Compatibility

Fits

CartYearsPowerNotes
Yamaha G29 Drive2007 to 2016Gas or electricFactory body

Does not fit

Your cartGet this instead
Yamaha Drive2 (2017 and up)Ultimate Plus kit for the Drive2
G29 Drive with a MadJax Havoc bodyHavoc light kit
Yamaha G14 to G22Headlight kit for G14 to G22
Want to be 100% sure?3 quick checks at the cart
  1. Check that your cart is a Yamaha G29 Drive from 2007 to 2016 with its factory body.

  2. A Drive2 or a Havoc body takes a different kit: see the Does NOT fit list.

  3. Unsure? Send us a photo of your cart from the front and its serial number.

What's in the box

  • LED headlights and LED taillights
  • Automotive-style turn signal stalk and steering column cover
  • Dual 5 volt USB charging port, 1 amp and 2.1 amp
  • Hazard switch and horn
  • Brake switch
  • 48 to 12 volt converter
  • Wiring harness, installation hardware and templates for cut-in lights (where the cart needs them)
  • Control box

Specifications

Brand
MadJax
Operation
12 to 48 volts, voltage converter included
Beams
High and low beam with automotive-style daytime running lights
Turn signals
Self-canceling, from the turn signal stalk
Stalk switches
High/low beam, daytime running lights, 2-position accessory light switch (light bars, underbody lights), horn button
Brake lights
Mechanical brake switch with built-in brake light timer
USB
Dash-mounted dual 5 volt USB port, 1 amp and 2.1 amp
Accessory output
7.5 amp 12 volt connection in the dash, for a radio or interior lights
Gas or electric
Both
Condition
New
Control box
30 second turn signal timer, no flasher or relay needed, brake lights switch off 3 minutes after the parking brake is set

Requirements and install notes

  1. Tools from the instructions: #2 Phillips screwdriver, rotary cutting tool, sandpaper, power drill, 15/32 in drill bit, 1-1/8 in paddle bit.

  2. Turn the key off and set the RUN/TOW switch to TOW. The batteries can stay in, but disconnect the main negative.

  3. On a cowl without pre-cut light holes, trace the headlight template, drill a pilot hole and cut inside the line with a rotary tool. Do the same at the rear with the taillight template.

  4. Route the harness, mount the hazard switch (15/32 in) and the USB charger (1-1/8 in) in the dash, then the brake switch, stalk and horn.

  5. Fit the voltage converter: Fit the voltage converter on every cart, gas or electric: red wire with the fuse to the main positive of the pack, black to the main negative, mounted flat under the seat (metal is best). On a gas cart it stops starter generator voltage spikes from damaging the lights.

  6. The maker recommends professional installation. Take your time if you fit it yourself.

FAQ

Does it work on a 48 volt cart?

Yes. The kit runs on 12 to 48 volts through the voltage converter in the box, on gas and electric carts.

What does the kit add besides headlights?

LED taillights, brake lights, self-canceling turn signals, a horn, a hazard switch, a dual USB port and a 7.5 amp 12 volt accessory connection in the dash.

Do I have to cut the body?

Only on a cowl or rear body without pre-cut light holes. The supplied templates show where to cut. The dash needs a 15/32 in hole for the hazard switch and a 1-1/8 in hole for the USB charger.

Will it fit my 2018 Drive?

No. From 2017 the cart is the Drive2, which takes the Drive2 kit. This one fits the G29 Drive from 2007 to 2016.

Does a light kit make my Drive street legal?

Lights, signals and brake lights are part of what most local rules ask for, but the rules differ by state and town. Check yours before you drive on the road.

Warranty

This LED light kit is new and covered by our returns and refunds policy. Returns and refunds · Shipping policy

Other options for your Yamaha G29 Drive

See all Yamaha Lights and Light Kits