OEM-Style Front Cowl and Rear Body Kit for E-Z-GO RXV (2008 to 2023)
4.7Lab rated
- Fits the E-Z-GO RXV, 2008 to 2023.
- Front cowl and rear body, pre-cut for lights.
- Dual-layer ABS and acrylic.
- Seven colours, made in the U.S.A.
Secure payments
Pay over time with Klarna on eligible orders. Express payment options available at checkout.
- Free shipping over $199, lower 48
- 30 day returns
- Email support
Overview
This is an OEM-style front cowl and rear body kit for the E-Z-GO RXV from 2008 to 2023. The dual-layer ABS and acrylic construction adds strength, the cowl and body come pre-cut for headlights and taillights, and they reuse your existing hardware.
Want your RXV to look new in a deeper colour? Seven metallic and custom colours, with OEM-inspired styling.
Lights: the MadJax Ultimate Plus and GTW LED light kits for the RXV are listed as compatible.
Manuals and documents
Compatibility
Fits
| Cart | Years | Gas or electric |
|---|---|---|
| E-Z-GO RXV | 2008 to 2023 | Gas or electric |
Does not fit
| Your cart | Get this instead |
|---|---|
| E-Z-GO TXT | OEM body kit for the TXT |
| Want only the front? | OEM-style front cowl for the RXV |
| Want only the rear? | OEM-style rear body for the RXV |
Want to be 100% sure?2 quick checks at the cart
Check that your cart is an E-Z-GO RXV from 2008 to 2023.
Pick your colour.
What's in the box
- Front cowl in the colour you pick, pre-cut for headlights
- Rear body in the colour you pick, pre-cut for taillights
Specifications
Compare options
| Specification | Black Metallic | Capri Blue | Midnight Blue Metallic | Racer Red Metallic | Steel Gray Metallic | Summit White | Vintage Burgundy Metallic |
|---|---|---|---|---|---|---|---|
| Part number | 05-287-BK01 | 05-287-BL11 | 05-287-BL10 | 05-287-RD08 | 05-287-GY01 | 05-287-WH05 | 05-287-VI04 |
- Construction
- Dual-layer ABS and acrylic
- Light cut-outs
- Pre-cut for headlights and taillights
- Hardware
- Reuses the existing hardware
- Made in
- U.S.A.
- Condition
- New
Requirements and install notes
Tools: ratchet, 9/16 in insulated wrench, adjustable wrench, #2 Phillips, 10/13/15 mm sockets and wrenches, 6 mm Allen, T20/T25/T27/T45 Torx.
Turn the key off and set the RUN/TOW switch to TOW. On electric carts disconnect the main negative of the battery pack.
Remove the canopy, rear seat kit if fitted, floor mat and the old cowl and rear body, noting where each bolt goes.
Fit the new cowl and rear body with the same hardware.
Leave the protective film on until the install is done, to avoid scratches.
Clean it only with automotive car wash products marked safe for clear coat.
FAQ
Is it pre-cut for lights?
Yes, the cowl is pre-cut for headlights and the rear body for taillights.
Does it reuse my hardware?
Yes, it reuses the existing installation hardware.
Is it made in the USA?
Yes.
How do I clean it?
Only with automotive car wash products marked safe for clear coat. Keep the protective film on until the install is done.
OEM-style or OEM body: what is the difference?
An OEM body is made by the cart maker in factory colours, with no light cut-outs. This OEM-style kit is made in the USA in deeper metallic colours and comes pre-cut for lights.
Warranty
This body kit is new and covered by our returns and refunds policy. Returns and refunds · Shipping policy
Manufacturer part reference
- GCL SKU
- GCL-OEM-STYLE-BODY-KIT-RXV
