Brand newGenuine MadJax
MadJax Nerf Bars with Side Step and Brackets for Yamaha Drive2 (2017 and Up)
4.6Lab rated
- Fits the Yamaha Drive2, 2017 and up.
- Drop-down side step both sides.
- Brackets and hardware included.
- Recon or Armor style.
Secure payments
Pay over time with Klarna on eligible orders. Express payment options available at checkout.
- Free shipping over $199, lower 48
- 30 day returns
- Email support
Overview
These are MadJax nerf bars with a drop-down side step and the brackets for the Yamaha Drive2. Pick the Recon step bar or the Armor nerf bar in the buy box.
Lifted cart or kids and older riders on board? The drop-down step makes it easy to climb in and out, and the bars shield the sides of the cart.
No drilling into the frame: the brackets bolt to the frame with U-bolts and the supplied hardware.
Compatibility
Fits
| Cart | Years | Gas or electric | Notes |
|---|---|---|---|
| Yamaha Drive2 | 2017 and up | Gas or electric | EFI: the QuieTech motor cover is discarded |
Does not fit
| Your cart | Get this instead |
|---|---|
| Yamaha G29 Drive | Nerf bars for the G29 Drive |
Want to be 100% sure?2 quick checks at the cart
Check your cart model and year on the serial plate.
Unsure? Send us a photo of the side of your cart.
What's in the box
- Driver and passenger nerf bars with drop-down side steps (Recon or Armor, as you pick)
- Brackets for the Yamaha Drive2
- Hardware pack with U-bolts
Specifications
Compare options
| Specification | Recon | Armor |
|---|---|---|
| Part number | 14-042 | 14-047 |
| Style | Recon step bar, black armor-coated | Armor nerf bar, matte texture |
- Brand
- MadJax
- Step
- Drop-down side step
- Brackets
- Yamaha Drive2
- Install
- No-drill, bolt-on frame install
- Condition
- New
Requirements and install notes
Tools: cordless drill driver, 17 mm socket and wrench.
Place the smaller U-bolt over the front of the frame and the larger U-bolt over the centre cross member under the front of the battery well.
Hook the bracket tab over the top of the frame directly behind the pedal box and guide the U-bolts through it, hand tight.
Tighten the U-bolt hardware evenly with a 17 mm socket.
Bolt the step on with the 10 x 55 mm bolts, all 4 in before tightening. Repeat on the other side.
On the EFI Drive2 the QuieTech motor cover has to be discarded to complete the install.
The maker recommends professional installation. Take your time and keep every bolt you remove: most steps reuse factory hardware.
FAQ
Recon or Armor: what is the difference?
The Recon is a step bar with a tough black armor-coated finish. The Armor nerf bar has a matte texture. Both have a drop-down side step and come with the same brackets.
Are the brackets included?
Yes, the brackets for the Yamaha Drive2 and the hardware are in the kit.
Do I have to drill?
No, the brackets bolt to the frame.
Do I get both sides?
Yes, driver and passenger.
Does it fit the Drive2 EFI?
Yes, but the maker notes the QuieTech EFI motor cover has to be discarded to complete the install.
Warranty
This nerf bar kit is new and covered by our returns and refunds policy. Returns and refunds · Shipping policy
Manufacturer part reference
- GCL SKU
- GCL-MADJAX-NERF-BARS-YAMAHA-DRIVE2