Brand newGenuine MadJax
MadJax Nerf Bars with Side Step and Brackets for E-Z-GO RXV (2008 to 2022)
4.6Lab rated
- Fits the E-Z-GO RXV, 2008 to 2022.
- Drop-down side step both sides.
- Brackets and hardware included.
- Recon or Armor style.
Out of stock
- Free shipping over $199, lower 48
- 30 day returns
- Email support
Overview
These are MadJax nerf bars with a drop-down side step and the brackets for the E-Z-GO RXV. Pick the Recon step bar or the Armor nerf bar in the buy box.
Lifted cart or kids and older riders on board? The drop-down step makes it easy to climb in and out, and the bars shield the sides of the cart.
No drilling into the frame: the brackets bolt to the frame with U-bolts and the supplied hardware.
Manuals and documents
Compatibility
Fits
| Cart | Years | Gas or electric |
|---|---|---|
| E-Z-GO RXV | 2008 to 2022 | Gas or electric |
Does not fit
| Your cart | Get this instead |
|---|---|
| E-Z-GO TXT | Recon nerf bars for the TXT |
| Club Car Precedent, Tempo and Onward | Nerf bars for Club Car |
| E-Z-GO RXV 2023 and up | Email us and we will match it |
Want to be 100% sure?2 quick checks at the cart
Check your cart model and year on the serial plate.
Unsure? Send us a photo of the side of your cart.
What's in the box
- Driver and passenger nerf bars with drop-down side steps (Recon or Armor, as you pick)
- Brackets for the E-Z-GO RXV
- Hardware pack with U-bolts
Specifications
Compare options
| Specification | Recon | Armor |
|---|---|---|
| Part number | 14-040 | 14-045 |
| Style | Recon step bar, black armor-coated | Armor nerf bar, matte texture |
- Brand
- MadJax
- Step
- Drop-down side step
- Brackets
- E-Z-GO RXV
- Install
- No-drill, bolt-on frame install
- Condition
- New
Requirements and install notes
Tools: cordless drill driver, 17 mm socket and wrench.
Place the supplied U-bolt over the front of the frame.
Slide the bracket under the frame with the angled tabs on top as a guide and hand tighten it to the U-bolt.
Slide the rear bracket mount onto the factory bolt under the battery box, fit the supplied hardware and tighten everything evenly with a 17 mm socket.
Bolt the step on with the 10 x 55 mm bolts, all 4 in before tightening. Repeat on the other side.
The maker recommends professional installation. Take your time and keep every bolt you remove: most steps reuse factory hardware.
FAQ
Recon or Armor: what is the difference?
The Recon is a step bar with a tough black armor-coated finish. The Armor nerf bar has a matte texture. Both have a drop-down side step and come with the same brackets.
Are the brackets included?
Yes, the brackets for the E-Z-GO RXV and the hardware are in the kit.
Do I have to drill?
No, the brackets bolt to the frame.
Do I get both sides?
Yes, driver and passenger.
Will it fit my cart?
It fits the carts in the table. Email us if yours is not listed and we will check.
Warranty
This nerf bar kit is new and covered by our returns and refunds policy. Returns and refunds · Shipping policy
Manufacturer part reference
- GCL SKU
- GCL-MADJAX-NERF-BARS-EZGO-RXV