Black Friday Sale is on. Shop now

Brand newGenuine MadJax

MadJax Brush Guard for the Apex Body Kit on E-Z-GO RXV

4.6Lab rated

$493.00
  • Fits the RXV with the MadJax Apex body, 2008 to 2022.
  • 1.5 in steel tubing, matte powder coat.
  • Under-cowl mount, no drilling.
  • Not for long travel lifts.

Secure payments

  • Visa
  • Mastercard
  • American Express
  • Discover
  • JCB
  • Apple Pay
  • Google Pay
  • Link
  • Klarna
  • Cash App Pay

Pay over time with Klarna on eligible orders. Express payment options available at checkout.

Brand MadJax SKU 14-037

Overview

This is the MadJax Apex brush guard, made for the MadJax Apex body kit on the E-Z-GO RXV from 2008 to 2022. It is 1.5 inch steel tubing with welded plate and tube construction and a lightly textured matte powder coat.

Built your RXV into an Apex? The guard follows the Apex body lines and protects the front from brush and knocks.

Easy install: an under-cowl mounting system means you do not have to disconnect the front struts, and no drilling is needed.

Compatibility

Fits

CartYearsGas or electricNotes
E-Z-GO RXV with the MadJax Apex body2008 to 2022Gas or electricApex body required

Does not fit

Your cartGet this instead
Carts with a long travel lift kit
E-Z-GO RXV with the factory bodyEmail us and we will match it
E-Z-GO TXT with the MadJax Storm bodyStorm brush guard
Want to be 100% sure?3 quick checks at the cart
  1. Check that your RXV wears the MadJax Apex body.

  2. Check that it does not have a long travel lift kit.

  3. Unsure? Send us a photo of the front of your cart.

What's in the box

  • MadJax Apex brush guard
  • Lower mounting brackets, left and right
  • M8 x 80 mm bolts and all mounting hardware
  • Allen wrench

Specifications

Brand
MadJax
Construction
1.5 in steel tubing, welded plate and tube
Finish
Lightly textured matte powder coat
Mounting
Under-cowl, no drilling
Light mounting points
None pre-drilled
Condition
New

Requirements and install notes

  1. Tools: 10, 13 and 15 mm sockets, 13 mm wrench and the Allen wrench in the kit.

  2. Remove the bolt holding each lower mounting tab to the chassis (15 mm) and fit the lower mounting brackets, leaving them loose.

  3. Hang the guard on the brackets under the cowl and bolt it up with the supplied hardware.

  4. Line it up with the Apex body and tighten everything.

FAQ

Does it fit a long travel lift?

No, it is not compatible with long travel lift kits.

Can I mount lights on it?

It has no pre-drilled auxiliary light mounting points.

Do I have to remove the front struts?

No. The under-cowl mounting system means the front struts stay connected.

Does it fit a factory RXV body?

It is made for the Apex body. Email us about a factory RXV and we will check.

Is all the hardware included?

Yes.

Warranty

This brush guard is new and covered by our returns and refunds policy. Returns and refunds · Shipping policy