Images are for reference only.
Brand newGenuine MadJax
MadJax Brush Guard for the Alpha Body Kit on Club Car Precedent
4.7Lab rated
- Fits the Precedent with the MadJax Alpha body.
- Satin black, laser cut logo.
- Light mounting tab.
- Hardware included.
Secure payments
Pay over time with Klarna on eligible orders. Express payment options available at checkout.
- Free shipping over $199, lower 48
- 30 day returns
- Email support
Overview
This is the MadJax brush guard for the Club Car Precedent from 2004 on with the MadJax Alpha body kit. It has a satin black finish, a laser cut MadJax logo and an integrated light mounting tab.
Running an Alpha body on trails or a farm? The guard protects the front fascia from brush and knocks.
Want a winch too? The maker's steps show where an MJFX winch goes if you fit one at the same time.
In the box
- MadJax brush guard, satin black
- Mounting plate
- Hardware pack: 8 mm and 10 mm bolts, washers and nylock nuts
Manuals and documents
Compatibility
Fits
| Cart | Years | Gas or electric | Notes |
|---|---|---|---|
| Club Car Precedent with the MadJax Alpha body | 2004 and up | Gas or electric | Alpha body required |
Does not fit
| Your cart | Get this instead |
|---|---|
| Club Car Precedent with the factory body | Jake's front bumper for the Precedent |
| Club Car Tempo and Onward | MadJax HD brush guard for the Tempo and Onward |
Want to be 100% sure?2 quick checks at the cart
Check that your Precedent wears the MadJax Alpha body.
Unsure? Send us a photo of the front of your cart.
Specifications
- Brand
- MadJax
- Finish
- Satin black
- Logo
- Laser cut MadJax logo
- Light tab
- Integrated
- Condition
- New
Requirements and install notes
Tools: 13 mm, 14 mm and 17 mm sockets, 17 mm wrench, cordless drill.
Fit the mounting plate to the front of the frame, then bolt the guard to it with the supplied 10 mm hardware, hand tight.
Fitting an MJFX winch? Do it at this point, with the winch hardware.
Line the guard up with the Alpha fascia and tighten every bolt.
The maker recommends professional installation. Take your time and keep every bolt you remove: most steps reuse factory hardware.
FAQ
Does it fit a factory Precedent body?
No, it is shaped for the Alpha body kit.
Can I mount lights?
Yes, it has an integrated light mounting tab.
Brush guard or Armor bumper for the Alpha?
The brush guard is a lighter guard over the front. The Armor bumper is heavy steel with light ports and a hidden winch mount.
What finish does it have?
Satin black with a laser cut MadJax logo.
Is the hardware included?
Yes, a full hardware pack.
Warranty
This brush guard is new and covered by our returns and refunds policy. Returns and refunds · Shipping policy
