E-Z-GO RXV Motor Encoder Bearing Service Kit
4.8Lab rated
- Fits the E-Z-GO RXV electric, 2008 and up.
- Encoder bearing service kit for the drive motor.
- Replaces E-Z-GO 612595.
- Repairs the speed sensor without a new motor.
- Bearing, plates, clip and screws.
Secure payments
Pay over time with Klarna on eligible orders. Express payment options available at checkout.
- Free shipping over $199, lower 48
- 30 day returns
- Email support
Overview
This service kit replaces the encoder bearing on the drive motor of the E-Z-GO RXV electric from 2008 on, E-Z-GO part 612595. The encoder bearing tells the controller how fast the motor is turning.
RXV throwing a speed sensor fault or stuck in limp mode? A failed encoder bearing is one cause. Replacing the bearing can save the motor.
Rebuilding the motor anyway? The kit has the bearing with its lead and 4-pin connector, the retaining plates, clip and screws, so it goes back together in one job.
In the box
- Encoder bearing with lead and 4-pin connector
- Two retaining plates and a clip
- Screws
Contents as shown in the kit photo.
Compatibility
Fits
| Cart | Years | Pack voltage | Replaces |
|---|---|---|---|
| E-Z-GO RXV electric | 2008 and up | 48V | E-Z-GO 612595 |
Does not fit
| Your cart | Get this instead |
|---|---|
| E-Z-GO TXT and other carts without an encoder bearing | Email us and we will match it |
| E-Z-GO gas carts | Email us and we will match it |
Want to be 100% sure?3 quick checks at the cart
Check that your cart is an E-Z-GO RXV electric from 2008 on.
Match the part number: E-Z-GO 612595.
Unsure? Send us a photo of the motor and its label.
Specifications
- Part number
- 3840
- Type
- Motor encoder bearing service kit
- Connector
- 4-pin
- Cart
- E-Z-GO RXV electric, 2008 and up
- Replaces
- E-Z-GO 612595
- Condition
- New
Requirements and install notes
Disconnect the battery pack and set the cart to Tow before you start.
The motor end cover comes off to reach the bearing. Follow the E-Z-GO service procedure for the RXV motor.
Route the new lead the same way as the old one, away from moving parts, and plug the 4-pin connector in fully.
If you are not comfortable working inside a motor, have a golf cart technician fit it.
FAQ
Which carts does it fit?
The E-Z-GO RXV electric from 2008 on. It replaces E-Z-GO 612595.
What does the encoder bearing do?
It is the motor bearing with a built-in speed sensor. The controller reads motor speed from it.
Encoder bearing kit or a new motor?
If the motor itself is sound and the fault is the speed sensor, the bearing kit is the smaller repair. A new motor replaces everything.
What is in the kit?
The encoder bearing with its lead and 4-pin connector, two retaining plates, a clip and screws, as shown in the photo.
Can I fit it myself?
If you are used to working on motors, yes: the end cover comes off to reach the bearing. Otherwise have a technician fit it.
Warranty
This part is new and covered by our returns and refunds policy. Returns and refunds · Shipping policy