Brand newGenuine Albright
Curtis Albright SW80 48V Main Contactor for Star EV Electric Carts
4.8Lab rated
- Fits Star EV 48V electric carts with the 4kW system.
- Original part: Star EV 2SO040.
- Curtis Albright SW80, 48V coil, Ith 125A.
- Gets a dead Star EV moving when the contactor has failed.
- New contactor.
Secure payments
Pay over time with Klarna on eligible orders. Express payment options available at checkout.
- Free shipping over $199, lower 48
- 30 day returns
- Email support
Overview
This is the 48V main contactor for Star EV electric carts with the 48V 4kW system, Star EV part 2SO040. The unit is a Curtis Albright SW80 (label SW80B-156) with a 48V continuous coil, built to meet or exceed the original equipment specification.
Star EV clicks and will not move? A failed main contactor is a common cause: the coil pulls in but the contacts no longer carry current to the controller. Test it before you replace it.
Want the original part, not a universal one? This is the same SW80 contactor Star fits at the factory, so it bolts into the same place and wires the same way.
- Voltage
- 48V
In the box
- One Curtis Albright SW80 48V main contactor, new
Compatibility
Fits
| Cart | Details | Pack voltage | Replaces |
|---|---|---|---|
| Star EV electric with the 48V 4kW system | All | 48V | Star EV 2SO040 |
Does not fit
| Your cart | Get this instead |
|---|---|
| 36V carts | Email us and we will match it |
| Star EV carts with a different contactor part number | Email us and we will match it |
Want to be 100% sure?2 quick checks at the cart
Check that your cart is a 48V Star EV electric.
Match the old part: Star EV 2SO040, or a Curtis Albright SW80 with a 48V coil.
Specifications
- Brand
- Curtis Albright
- Part number
- 2SO040 (Star EV)
- Contactor
- SW80B-156
- Coil
- 48V, continuous duty
- Rated current (Ith, label)
- 125A
- Standard (label)
- IEC 60947-4-1
- Coil terminals
- Two spade terminals, A1 and A2
- Cart
- Star EV electric, 48V 4kW system
- Condition
- New
Requirements and install notes
Disconnect the battery pack before you touch the contactor.
Photograph the wiring first so every cable goes back on the same post and the coil wires go back on A1 and A2.
Move the cables across one at a time and tighten the post nuts without over-tightening.
Check the cart in a safe space before you drive it.
FAQ
Which carts does this contactor fit?
Star EV electric carts with the 48V 4kW system that use Star EV main contactor 2SO040.
Is it the original Star EV part?
Yes. 2SO040 is the Star EV part number, and the unit is a Curtis Albright SW80 contactor with a 48V coil.
What is the current rating?
The label shows SW80B-156, 48V continuous coil, Ith 125A.
SW80 or a heavy duty 400A solenoid?
The SW80 is the original equipment main contactor for the stock Star EV system. A heavy duty contactor is for high amp controller upgrades. Ask us if you have upgraded the controller.
Will it work on a 36V Star EV?
No. The coil is 48V.
Warranty
This part is new and covered by our returns and refunds policy. Returns and refunds · Shipping policy